How to Install an Antenna Cable and Body Assembly on 2008 Dodge Caliber?

Installation of the antenna assembly requires the assembly to be placed in the fender, the cable into the assembly and the grommet sat to be installed. Connect the cable with the harness, place the nut, adapter and shroud. Connect the cowl trim, reconnect the battery negative cable, tighten the mast to 5 Nm, and connect the antenna cable.

OEM 2008 Dodge Caliber Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Antenna Cables found

View related parts
2008 Dodge Caliber Cable Extension Part Number: 4672396AD
$2.81 MSRP: $16.15
You Save: $13.34 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable - Antenna Extension; GPS Navigation System Antenna Cable; Cable; Cable Antenna Extension
- Replaces: 4672396AC
- Item Weight: 0.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4672396AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Caliber Submodels:
- R/T, SE, SRT-4, SXT | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2008 Dodge Caliber Antenna Cable Part Number: 5064282AB
Product Specifications
- Other Name: Wiring - Antenna; Cable Antenna
- Replaces: 5064282AA
- Item Weight: 36.60 Pounds
- Item Dimensions: 49.0 x 19.1 x 11.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5064282AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Caliber Submodels:
- R/T, SE, SRT-4, SXT | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2008 Dodge Caliber Antenna Cable Parts and Q&A

Q: How to Install an Antenna Cable and Body Assembly on 2008 Dodge Caliber?
A: Installation of the antenna assembly requires the assembly to be placed in the fender, the cable into the assembly and the grommet sat to be installed. Connect the cable with the harness, place the nut, adapter and shroud. Connect the cowl trim, reconnect the battery negative cable, tighten the mast to 5 Nm, and connect the antenna cable.