How to Install a Belt Tensioner for the Accessory Drive on 2008 Dodge Caliber?

To fit the accessory drive belt tensioner, place it where it needs to go and install and tighten the mounting bolt to 24 Nm (212 in. lbs.). Then, put in the accessory drive belt and follow it with the installation of the belt splash shield (3). Then, slowly lower the vehicle's height.

OEM 2008 Dodge Caliber Belt Tensioner

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Belt Tensioners found

View related parts
2008 Dodge Caliber Belt Tensioner Part Number: 4891595AE
$92.14 MSRP: $141.00
You Save: $48.86 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tensioner - Belt, Accessory Drive Tensioner, Serpentine Kit, Automatic Tensioner, Idler Pulley; Tension Pulley; Serpentine Tensioner; Tensioner; Tensioner Belt; Drive Belt Tensioner
- Replaces: 4891595AD, 4891595AC, 4891595AB
- Item Weight: 2.10 Pounds
- Item Dimensions: 4.9 x 5.0 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4891595AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2008 Dodge Caliber Belt Tensioner Part Number: 4891976AC
Product Specifications
- Other Name: Tensioner - Belt; Accessory Drive Belt Tensioner Assembly; Serpentine Belt Drive Kit; Serpentine Tensioner
- Replaces: 4891976AB
- Item Weight: 2.30 Pounds
- Item Dimensions: 5.4 x 4.9 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4891976AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Caliber Submodels:
- SRT-4 | 4 Cyl 2.4 L GAS

2008 Dodge Caliber Belt Tensioner Parts and Q&A

Q: How to Install a Belt Tensioner for the Accessory Drive on 2008 Dodge Caliber?
A: To fit the accessory drive belt tensioner, place it where it needs to go and install and tighten the mounting bolt to 24 Nm (212 in. lbs.). Then, put in the accessory drive belt and follow it with the installation of the belt splash shield (3). Then, slowly lower the vehicle's height.