How Can the Canister Purge Valve Be Installed and Removed on 2008 Dodge Challenger?

The Canister Purge Valve, which is on a bracket near the right rear of the engine, must be installed properly to function. In order to remove it, first disconnect the electrical connector, then remove the vacuum tubes, and finally remove the valve from the bracket.

OEM 2008 Dodge Challenger Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Canister Purge Valve found

View related parts
2008 Dodge Challenger Purge Valve Part Number: 4891738AD
$36.56 MSRP: $54.40
You Save: $17.84 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Linear Purge; Purge Solenoid; Solenoid
- Replaces: 4891738AA, 4891738AB
- Item Weight: 1.10 Pounds
- Item Dimensions: 6.8 x 3.9 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4891738AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Challenger Submodels:
- 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Widebody, R/T Shaker, Rallye Redline, SE, SRT 392, SRT Demon, SRT Hellcat, SRT Hellcat Redeye, SRT Hellcat Redeye Widebody, SRT Hellcat Widebody, SRT8, SXT, SXT Plus, Scat Pack, T/A, T/A 392 | 3.5L V6, 3.6L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

2008 Dodge Challenger Canister Purge Valve Parts and Q&A

Q: How Can the Canister Purge Valve Be Installed and Removed on 2008 Dodge Challenger?
A: The Canister Purge Valve, which is on a bracket near the right rear of the engine, must be installed properly to function. In order to remove it, first disconnect the electrical connector, then remove the vacuum tubes, and finally remove the valve from the bracket.