Other Name: Hose - Power Steering Supply; Power Steering Reservoir Hose; Power Steering Hose; Power Steering Suction Hose; Upper Return Hose; Hose Power Steering Supply Reservoir To Pump; Hose Power Steering Supply
Item Weight: 1.00 Pounds
Item Dimensions: 17.5 x 7.4 x 3.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4782350AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
Daytona R/T, Pursuit, R/T, SE, SRT8 | 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
Other Name: Hose - Power Steering Pressure; Power Steering Hose
Replaced by: 4782954AG
Item Weight: 0.60 Pounds
Item Dimensions: 22.2 x 8.2 x 5.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4782954AF
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
R/T | 8 Cyl 5.7 L GAS
2008 Dodge Charger Power Steering Hose Parts and Q&A
Q: How to Service and Repair a Power Steering Hose from Gear to Cooler on an AWD on 2008 Dodge Charger?
A: Ensure you separate the battery negative cable from the battery post before starting to service the power steering return hose on an AWD vehicle. Remove the power steering fluid from the bottom of the reservoir, then raise and support the car. First, take out the belly pan, then unclamp and remove the hose at the cooler. After that, remove the return hose from the routing clip on the cooling module and take out the tube nut from the steering gear. Remove the screws holding the routing clamps on the side of the engine cradle and take the return hose out of the car.