How to Maintain and Fix a Washer Reservoir on 2008 Dodge Charger?

Before you service or repair the windshield washer reservoir, you need to first unhook and separate the battery's negative cable. Once that's done, you'll have to detach the front fascia according to the proper directions. Loosen the electrical harness connectors from the reservoir, take out the hose and let the fluid flow into a container. Remove the one rear fastener and then all of the other fasteners holding the reservoir before you can remove it.

OEM 2008 Dodge Charger Washer Reservoir

Windshield Washer Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Washer Reservoir found

View related parts
2008 Dodge Charger Washer Reservoir Part Number: 5170707AA
Product Specifications
- Other Name: Reservoir - Windshield Washer; Washer Fluid Reservoir; Windshield Washer Reservoir; Reservoir Windshield Washer
- Item Weight: 3.00 Pounds
- Item Dimensions: 25.4 x 12.8 x 9.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5170707AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2008 Dodge Charger Washer Reservoir Parts and Q&A

Q: How to Maintain and Fix a Washer Reservoir on 2008 Dodge Charger?
A: Before you service or repair the windshield washer reservoir, you need to first unhook and separate the battery's negative cable. Once that's done, you'll have to detach the front fascia according to the proper directions. Loosen the electrical harness connectors from the reservoir, take out the hose and let the fluid flow into a container. Remove the one rear fastener and then all of the other fasteners holding the reservoir before you can remove it.