How to Locate, Check, and Install a Fuel Pump Relay on 2008 Dodge Dakota?

Inside the Power Distribution Center (PDC), the fuel pump relay is placed, with removal of the PDC cover coming first. Following this, take out the relay from the PDC and check if the relay's and PDC's terminals are not corroded or otherwise harmed; fix them if necessary and reinstall the relay afterward. Always check that the height of all pins in the PDC connector is the same and make the needed repairs before putting in the relay.

OEM 2008 Dodge Dakota Fuel Pump Relay

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pump Relay found

View related parts
2008 Dodge Dakota Fuel Pump Relay, Rear Part Number: 4727370AA
$26.96 MSRP: $39.90
You Save: $12.94 (33%)
ADD TO CART
Product Specifications
- Other Name: Relay - Mini; PCM Relay; Fan Relay; Accessory Relay(F/R); A/C Clutch; Starter; Fog Light; Fan Relay; Blower Motor Relay; Oxygen Sensor Relay; Mini 5 Terminal Square Relay.
- Position: Rear
- Replaces: 56006707, 56006709, 4848879AB, 4638094, 68369406AA, 68223712AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.3 x 1.4 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4727370AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Dakota Submodels:
- Base, Big Horn, LE, Laramie, Lone Star, R/T, S, SLT, SLT Plus, ST, SXT, Sport, Sport Plus, TRX, TRX4, WS | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2008 Dodge Dakota Fuel Pump Relay Parts and Q&A

Q: How to Locate, Check, and Install a Fuel Pump Relay on 2008 Dodge Dakota?
A: Inside the Power Distribution Center (PDC), the fuel pump relay is placed, with removal of the PDC cover coming first. Following this, take out the relay from the PDC and check if the relay's and PDC's terminals are not corroded or otherwise harmed; fix them if necessary and reinstall the relay afterward. Always check that the height of all pins in the PDC connector is the same and make the needed repairs before putting in the relay.