How to Install an Oil Pressure Switch on 2008 Dodge Dakota?

Begin by installing the oil pressure switch and the connector. Then, install the front splash shield and lower the vehicle. Reconnect the negative battery cable and start the engine, and observe for any oil leaks on the oil pressure switch.

OEM 2008 Dodge Dakota Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2008 Dodge Dakota Switch - Oil Pressure Part Number: 5149097AB
$58.76 MSRP: $88.10
You Save: $29.34 (34%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149097AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX

2008 Dodge Dakota Oil Pressure Switch Parts and Q&A

Q: How to Install an Oil Pressure Switch on 2008 Dodge Dakota?
A: Begin by installing the oil pressure switch and the connector. Then, install the front splash shield and lower the vehicle. Reconnect the negative battery cable and start the engine, and observe for any oil leaks on the oil pressure switch.