How to Install a Door Hinge on the Rear Door on 2008 Dodge Durango?

When installing the rear door hinge, start by putting sealant under the upper body part when removing or adjusting the hinges. Reinstall the hinge to door washers if required, secure the hinges with nuts and tighten them to 28 Nm (21 ft. lbs.). After that, secure the three hinge bolts to the B-pillar until tight because the right-hand door is the one shown (and so on for the left-hand door). Move the door up or down as soon as it is needed. Apply a matching body sealant around the lower hinge when you need to remove or shift them. Hold the hinge with one hand and, using a torque wrench, tighten the attached B-pillar bolts to 28 Nm (21 ft. lbs.) following the recommended order. Then, connect the hinge to door washers, if you removed them previously and tighten the nuts with 28Nm (21 ft. lbs.) of torque. Adjust the door if required and after that, fit the B-pillar lower trim piece.

OEM 2008 Dodge Durango Door Hinge

Interior Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Door Hinges found

View related parts
2008 Dodge Durango Lower Hinge, Front Driver Side Part Number: 55364681AA
$51.84 MSRP: $106.00
You Save: $54.16 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Front Door Lower; Door Hinge, Front Left Lower; Hinge Front Door Lower; Door Hinge
- Position: Front Lower Driver Side
- Item Weight: 2.20 Pounds
- Item Dimensions: 6.3 x 4.8 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55364681AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2008 Dodge Durango Upper Hinge, Front Driver Side Part Number: 55256915AG
$61.55 MSRP: $126.00
You Save: $64.45 (52%)
ADD TO CART
Product Specifications
- Other Name: Hinge - Front Door Upper; Door Hinge, Front Left Upper; Hinge Front Door Upper; Door Hinge
- Position: Front Upper Driver Side
- Replaces: 55256915AE, 55256915AD, 55256915AC
- Item Weight: 2.70 Pounds
- Item Dimensions: 6.4 x 6.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55256915AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Base, Limited, Limited Hybrid, R/T, SE, SLT, SLT Plus, ST, SXT, Sport | 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2008 Dodge Durango Upper Hinge, Rear Passenger Side Part Number: 55364682AA
$38.24 MSRP: $54.85
You Save: $16.61 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Rear Door; Door Hinge, Rear Right Upper; Hinge Rear Door Upper; Door Hinge
- Position: Rear Upper Passenger Side
- Item Weight: 1.60 Pounds
- Item Dimensions: 6.6 x 3.8 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55364682AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2008 Dodge Durango Lower Hinge, Rear Driver Side Part Number: 55364685AA
Product Specifications
- Other Name: Hinge - Rear Door Lower; Door Hinge, Rear Left Lower; Hinge Rear Door Lower; Door Hinge
- Position: Rear Lower Driver Side
- Item Weight: 2.40 Pounds
- Item Dimensions: 6.5 x 5.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55364685AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2008 Dodge Durango Upper Hinge, Front Passenger Side Part Number: 55256914AG
Product Specifications
- Other Name: Hinge - Front Door Upper; Door Hinge, Front Right Upper; Hinge Front Door Upper; Door Hinge
- Position: Front Upper Passenger Side
- Replaces: 55256914AC, 55256914AE, 55256914AD
- Item Weight: 2.60 Pounds
- Item Dimensions: 6.4 x 6.3 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55256914AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Base, Limited, Limited Hybrid, R/T, SE, SLT, SLT Plus, ST, SXT, Sport | 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2008 Dodge Durango Upper Hinge, Rear Driver Side Part Number: 55364683AA
Product Specifications
- Other Name: Hinge - Rear Door; Door Hinge, Rear Left Upper; Hinge Rear Door Upper; Door Hinge
- Position: Rear Upper Driver Side
- Item Weight: 1.70 Pounds
- Item Dimensions: 6.5 x 3.8 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55364683AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2008 Dodge Durango Lower Hinge, Rear Passenger Side Part Number: 55364684AA
Product Specifications
- Other Name: Rear Door Lower; Door Hinge, Rear Right Lower; Hinge Rear Door Lower; Door Hinge
- Position: Rear Lower Passenger Side
- Item Weight: 2.60 Pounds
- Item Dimensions: 6.8 x 5.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55364684AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2008 Dodge Durango Lower Hinge, Front Passenger Side Part Number: 55364680AA
Product Specifications
- Other Name: Hinge - Front Door Lower; Door Hinge, Front Right Lower; Hinge Front Door Lower; Door Hinge
- Position: Front Lower Passenger Side
- Item Weight: 2.20 Pounds
- Item Dimensions: 6.3 x 4.8 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55364680AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2008 Dodge Durango Hinge, Rear Part Number: 4589059AD
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge, Rear; Door Hinge; Hinge Liftgate; Liftgate Hinge
- Position: Rear
- Replaces: 4589059AA, 4589059AB, 55257015AF, 55257015AC, 4589059AC, 55257015AD, 55257015AE
- Item Weight: 1.20 Pounds
- Item Dimensions: 4.3 x 2.9 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4589059AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Base, Limited, Limited Hybrid, R/T, SE, SLT, SLT Plus, ST, SXT, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS

2008 Dodge Durango Door Hinge Parts and Q&A

Q: How to Install a Door Hinge on the Rear Door on 2008 Dodge Durango?
A: When installing the rear door hinge, start by putting sealant under the upper body part when removing or adjusting the hinges. Reinstall the hinge to door washers if required, secure the hinges with nuts and tighten them to 28 Nm (21 ft. lbs.). After that, secure the three hinge bolts to the B-pillar until tight because the right-hand door is the one shown (and so on for the left-hand door). Move the door up or down as soon as it is needed. Apply a matching body sealant around the lower hinge when you need to remove or shift them. Hold the hinge with one hand and, using a torque wrench, tighten the attached B-pillar bolts to 28 Nm (21 ft. lbs.) following the recommended order. Then, connect the hinge to door washers, if you removed them previously and tighten the nuts with 28Nm (21 ft. lbs.) of torque. Adjust the door if required and after that, fit the B-pillar lower trim piece.