How to Install the Drive Belt on 3.7L/4.7L Engines on 2008 Dodge Durango?

To install accessory drive belt to 3.7L/4.7L engines check all pulleys and correctly route the new accessory drive belt to prevent overheating. Install it around all of the pulleys except the idler, then rotate the tensioner and check for proper seating. For 4.7L engines, the gap should be no more than 24mm, replace if required.

OEM 2008 Dodge Durango Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Drive Belts found

View related parts
2008 Dodge Durango Serpentine Belt Part Number: 53032805AB
$69.13 MSRP: $104.00
You Save: $34.87 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
- Item Weight: 1.10 Pounds
- Item Dimensions: 23.8 x 7.8 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032805AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 8 Cyl 5.7 L GAS
View related parts
2008 Dodge Durango Belt - Serpentine Part Number: 68027636AB
$52.48 MSRP: $77.95
You Save: $25.47 (33%)
ADD TO CART
Product Specifications
- Other Name: BELT-SERPENTINE
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68027636AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Limited, SE, SLT, SXT | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2008 Dodge Durango Drive Belt Parts and Q&A

Q: How to Install the Drive Belt on 3.7L/4.7L Engines on 2008 Dodge Durango?
A: To install accessory drive belt to 3.7L/4.7L engines check all pulleys and correctly route the new accessory drive belt to prevent overheating. Install it around all of the pulleys except the idler, then rotate the tensioner and check for proper seating. For 4.7L engines, the gap should be no more than 24mm, replace if required.