How to Remove and Replace an Exhaust Manifold for Right on 2008 Dodge Grand Caravan?

For the removal and replacement of the exhaust manifold, first fix the exhaust manifold (5) to the cylinder head and use bolts to join it to the center runner (cylinder #3), initially fastening them to 2.8 Nm (25 in. lbs.). When installing a new gasket, set the crossover pipe (1) in place on the exhaust manifold, tighten the bolts to 41 Nm (30 ft. lbs.) and look for heat- or corrosion-related damage, as all OEM bolts should be used due to the specific alloy in the crossover bolts. Now, put in the final manifold attaching bolts and tighten them down to 23 Nm (200 in. lbs.). Next, add the heat shield (2,4) and connect it with the attached screws and also install and attach the upstream oxygen sensor. Lift the car, then thread the catalytic converter pipe (4) onto the exhaust manifold using a new gasket and tighten the bolts to 37 Nm (27 ft. lbs.). Attach the oxygen sensor to its connector, set up the splash shield where the belt passes and drop the car. After that, add the wiper module and tie the battery's negative standby cable to it.

OEM 2008 Dodge Grand Caravan Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Exhaust Manifolds found

View related parts
2008 Dodge Grand Caravan Crossover Pipe Part Number: 4781042AF
$480.68 MSRP: $731.00
You Save: $250.32 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust Manifold; Exhaust Crossover Pipe; Exhaust Pipe; Cross Over Pipe; Crossover Exhaust Manifold
- Item Weight: 6.70 Pounds
- Item Dimensions: 22.5 x 10.1 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4781042AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Grand Caravan Submodels:
- C/V, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
2008 Dodge Grand Caravan Catalytic Converter, Driver Side Part Number: 5171141AC
$2065.20 MSRP: $3030.00
You Save: $964.80 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust And Catalytic Conve; Catalytic Converter with Integrated Exhaust Manifold, Left; Exhaust Manifold; Manifold; Manifold Exhaust And Catalytic Converter
- Position: Driver Side
- Item Weight: 12.10 Pounds
- Item Dimensions: 18.9 x 12.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5171141AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Grand Caravan Submodels:
- SXT | 6 Cyl 4.0 L GAS
View related parts
2008 Dodge Grand Caravan Catalytic Converter, Passenger Side Part Number: 5171140AC
$2340.00 MSRP: $3425.00
You Save: $1085.00 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust and Catalytic Converter; Right Catalytic Converter with Integrated Manifold.; Manifold
- Position: Passenger Side
- Replaces: 5171140AB
- Item Weight: 16.40 Pounds
- Item Dimensions: 18.5 x 16.5 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5171140AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Grand Caravan Submodels:
- SXT | 4.0L V6, 6 Cyl 4.0 L GAS
View related parts
2008 Dodge Grand Caravan Catalytic Converter, Driver Side Part Number: 5171143AD
$943.68 MSRP: $1360.00
You Save: $416.32 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Catalytic; Catalytic Converter with Integrated Exhaust Manifold, Left; Exhaust Manifold; Manifold
- Position: Driver Side
- Replaces: 5171143AC
- Item Weight: 11.70 Pounds
- Item Dimensions: 18.8 x 13.0 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5171143AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Grand Caravan Submodels:
- SXT | 4.0L V6, 6 Cyl 4.0 L GAS
View related parts
2008 Dodge Grand Caravan Exhaust Manifold, Driver Side Part Number: 4781041AC
$300.56 MSRP: $459.00
You Save: $158.44 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold; Manifold Exhaust
- Position: Driver Side
- Item Weight: 10.70 Pounds
- Item Dimensions: 15.8 x 9.2 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4781041AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Grand Caravan Submodels:
- C/V, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
2008 Dodge Grand Caravan Exhaust Manifold, Passenger Side Part Number: 4666084AC
$208.47 MSRP: $311.00
You Save: $102.53 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold; Manifold Exhaust
- Position: Passenger Side
- Item Weight: 14.10 Pounds
- Item Dimensions: 9.6 x 10.5 x 15.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4666084AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Grand Caravan Submodels:
- C/V, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

2008 Dodge Grand Caravan Exhaust Manifold Parts and Q&A

Q: How to Remove and Replace an Exhaust Manifold for Right on 2008 Dodge Grand Caravan?
A: For the removal and replacement of the exhaust manifold, first fix the exhaust manifold (5) to the cylinder head and use bolts to join it to the center runner (cylinder #3), initially fastening them to 2.8 Nm (25 in. lbs.). When installing a new gasket, set the crossover pipe (1) in place on the exhaust manifold, tighten the bolts to 41 Nm (30 ft. lbs.) and look for heat- or corrosion-related damage, as all OEM bolts should be used due to the specific alloy in the crossover bolts. Now, put in the final manifold attaching bolts and tighten them down to 23 Nm (200 in. lbs.). Next, add the heat shield (2,4) and connect it with the attached screws and also install and attach the upstream oxygen sensor. Lift the car, then thread the catalytic converter pipe (4) onto the exhaust manifold using a new gasket and tighten the bolts to 37 Nm (27 ft. lbs.). Attach the oxygen sensor to its connector, set up the splash shield where the belt passes and drop the car. After that, add the wiper module and tie the battery's negative standby cable to it.