How to Properly Install a Brake Master Cylinder on 2008 Dodge Magnum?

To install the brake master cylinder, new sealing grommets are installed into the housing, lubricated with brake fluid and the reservoir is seated. Tighten mounting screw to 28 Nm, connect the sensor and fill with Mopar(R) Brake Fluid. Make sure that there is a firm brake pedal before driving and perform a road test.

OEM 2008 Dodge Magnum Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Master Cylinders found

View related parts
2008 Dodge Magnum Master Cylinder Part Number: 68033786AA
$201.02 MSRP: $305.00
You Save: $103.98 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 2.50 Pounds
- Item Dimensions: 11.3 x 6.5 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68033786AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Magnum Submodels:
- R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2008 Dodge Magnum Master Cylinder Part Number: 68033788AA
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 2.60 Pounds
- Item Dimensions: 11.6 x 6.6 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68033788AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Magnum Submodels:
- R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2008 Dodge Magnum Brake Master Cylinder Parts and Q&A

Q: How to Properly Install a Brake Master Cylinder on 2008 Dodge Magnum?
A: To install the brake master cylinder, new sealing grommets are installed into the housing, lubricated with brake fluid and the reservoir is seated. Tighten mounting screw to 28 Nm, connect the sensor and fill with Mopar(R) Brake Fluid. Make sure that there is a firm brake pedal before driving and perform a road test.