How to Install an Ignition Coil in a 2.7L Engine on 2008 Dodge Magnum?

To install the ignition coil for 2.7L engine, align it with the spark plug and twist it down securing it with a bolt with 7.5 Nm. Connect the electrical connector and install the upper intake manifold and reconnect the negative battery cable, tightening to 5 Nm.

OEM 2008 Dodge Magnum Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Coils found

View related parts
2008 Dodge Magnum Ignition Coil Part Number: 68238603AA
$104.52 MSRP: $144.00
You Save: $39.48 (28%)
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil; Coil Ignition
- Replaces: 56029129AA, 56029129AF, 56029129AB, 68060346AA
- Item Weight: 2.40 Pounds
- Item Dimensions: 3.5 x 6.5 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68238603AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Magnum Submodels:
- R/T, SRT8 | 5.7L V8, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2008 Dodge Magnum Ignition Coil Part Number: 4606869AD
$83.46 MSRP: $116.00
You Save: $32.54 (29%)
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil; Coil
- Replaces: 4606869AC, 4606869AB, 4606869AA
- Item Weight: 0.90 Pounds
- Item Dimensions: 2.7 x 3.3 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4606869AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Magnum Submodels:
- SE, SXT | 2.7L V6, 3.5L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2008 Dodge Magnum Ignition Coil Parts and Q&A

Q: How to Install an Ignition Coil in a 2.7L Engine on 2008 Dodge Magnum?
A: To install the ignition coil for 2.7L engine, align it with the spark plug and twist it down securing it with a bolt with 7.5 Nm. Connect the electrical connector and install the upper intake manifold and reconnect the negative battery cable, tightening to 5 Nm.