How to Install a Knock Sensor and What Are the Steps Involved on 2008 Dodge Magnum?

Install the knock sensor by screwing it to the cylinder block below the intake manifold - tighten the bolts to 10 Nm. Connect the electrical connector, and install the passenger side cylinder head and intake manifold. Finally, reconnect the negative battery cable and tighten the nut to 5 Nm.

OEM 2008 Dodge Magnum Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Knock Sensors found

View related parts
2008 Dodge Magnum Knock Sensor Part Number: 4606093AD
$103.54 MSRP: $157.00
You Save: $53.46 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Detonation; Ignition Knock (Detonation) Sensor; Sensor; Sensor Detonation
- Replaces: 4606093
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.3 x 2.7 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4606093AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Magnum Submodels:
- SE, SXT, SXT Special Edition | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Magnum Knock Sensor Part Number: 5033316AB
$128.23 MSRP: $194.00
You Save: $65.77 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; MAP Sensor; Sensor Knock
- Replaces: 5033316AA, 56028563AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.1 x 1.3 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5033316AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Magnum Submodels:
- R/T, SRT8 | 5.7L V8, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2008 Dodge Magnum Knock Sensor Parts and Q&A

Q: How to Install a Knock Sensor and What Are the Steps Involved on 2008 Dodge Magnum?
A: Install the knock sensor by screwing it to the cylinder block below the intake manifold - tighten the bolts to 10 Nm. Connect the electrical connector, and install the passenger side cylinder head and intake manifold. Finally, reconnect the negative battery cable and tighten the nut to 5 Nm.