Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2008 Dodge Nitro Fuel Pump

Gas Pump
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fuel Pumps found

  • 2008 Dodge Nitro Fuel Pump - 68004936AE
    2008 Dodge Nitro Fuel Pump - 68004936AE
    2008 Dodge Nitro Fuel Pump - 68004936AE
    2008 Dodge Nitro Fuel Pump - 68004936AE
    2008 Dodge Nitro Fuel Pump - 68004936AE
    2008 Dodge Nitro Fuel Pump Diagram - 68004936AE
    View related parts

    2008 Dodge Nitro Fuel Pump Part Number: 68004936AE

    $450.91 MSRP: $640.00
    You Save: $189.09 (30%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Module - Fuel Pump/Level Unit; Fuel Sender Assembly; Electric Fuel Pump; Fuel Level Sensor.; Fuel Gauge Sending Unit; Sending Unit
    • Replaces: 68017714AC, 68004936AB, 68004936AC, 68004936AD, RL004936AC
    • Item Weight: 3.70 Pounds
    • Item Dimensions: 13.8 x 10.8 x 7.8 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 68004936AE
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2008 Dodge Nitro Submodels:
    • Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
  • 2008 Dodge Nitro Fuel Pump - 68004095AE
    2008 Dodge Nitro Fuel Pump Diagram - 68004095AE
    View related parts

    2008 Dodge Nitro Module - Fuel Pump/Level Unit Part Number: 68004095AE

    $463.73 MSRP: $675.00
    You Save: $211.27 (32%)
    Product Specifications
    • Other Name: MODULE-FUEL PUMP/LEVEL UNIT
    • SKU: 68004095AE
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following 2008 Dodge Nitro Submodels:
    • Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2008 Dodge Nitro Fuel Pump Parts and Q&A

  • Q: How to Service the Fuel Pump and Gauge Sender on 2008 Dodge Nitro?
    A: The fuel gauge sender needs to have the pressure in the system released before being serviced, since the fuel system stays under pressure at all times. Cover the process by taking out the fuel tank before any other step. Before taking off the module, make sure you write down the fuel pump's rotational position based on the indexing arrow on the pump's top. Place the 9340 Lockring Remover/Installer tool in the notches you can find along the outside of the lockring. Put on a 1/2 inch drive breaker bar to the Lockring Remover/Installer tool 9340 and turn the breaker bar counter-clockwise to remove the lockring. With the lockring gone, the module will rise up a bit so that it can be taken out of the fuel tank without putting pressure on the float arm.

Related 2008 Dodge Nitro Parts

Alternate Year Models

+
2007 Dodge Nitro Fuel Pump 2009 Dodge Nitro Fuel Pump