How to Service and Repair a Fuel Pump on Dodge Nitro?

Make sure to release the pressure in the fuel system before you start service or repair of the fuel level sensor, as it is constantly pressurized. Take out the fuel tank and use the index arrow on top of the fuel pump module to check where it's turned. Hold the top end of tool 9340 on each of the 3 notches found on the outside of the lockring. Use a 1/2 inch drive breaker bar to remove the lockring after it is attached to tool 9340 and turn the breaker bar counter-clockwise. Removing the lockring will make the module move up slightly so it may be removed from the tank. Don't try to bend the float arm when installing the washer.

OEM Dodge Nitro Fuel Pump

Gas Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fuel Pumps found

View related parts
Dodge Nitro Fuel Pump Part Number: 68004936AE
$450.91 MSRP: $640.00
You Save: $189.09 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Fuel Pump/Level Unit; Fuel Sender Assembly; Electric Fuel Pump; Fuel Level Sensor.; Fuel Gauge Sending Unit; Sending Unit
- Replaces: 68017714AC, 68004936AB, 68004936AC, 68004936AD, RL004936AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Module - Fuel Pump/Level Unit Part Number: 68004095AE
$463.73 MSRP: $675.00
You Save: $211.27 (32%)
Product Specifications
- Other Name: MODULE-FUEL PUMP/LEVEL UNIT
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

Dodge Nitro Fuel Pump

Choose OEM Fuel Pump that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Fuel Pump follows strict manufacturing steps to lock in quality and fit. If your Dodge Nitro matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Nitro parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Fuel Pump in Dodge Nitro vehicles is used in supplying fuel from the tank to the carburetor or the fuel injection system in an engine. Original, Dodge Nitro cars employ electric fuel pumps which as a rule are installed inside the fuel tank and are part of the sending unit for fuel quantity indication. These pumps are required to develop higher pressures needed in the contemporary fuel injection systems to facilitate proper supply of fuel for ignition. However, older models may have used mechanical fuel pumps which are installed externally, and work at comparatively lower pressure as those used in carbureted engines. Mechanical pumps have been used before and are not as efficient as electric pumps that also bring benefits such as better heat dissipation and more safety options. In total, as a part of Dodge Nitro vehicle, the Fuel Pump system is designed to be adaptive to performance and efficiency requirements of modern automotive market.

Dodge Nitro Fuel Pump Parts and Q&A

Fuel Pump
68004936AE
Q: How to Service and Repair a Fuel Pump on Dodge Nitro?
A:
Make sure to release the pressure in the fuel system before you start service or repair of the fuel level sensor, as it is constantly pressurized. Take out the Fuel Tank and use the index arrow on top of the fuel pump module to check where it's turned. Hold the top end of tool 9340 on each of the 3 notches found on the outside of the lockring. Use a 1/2 inch drive breaker bar to remove the lockring after it is attached to tool 9340 and turn the breaker bar counter-clockwise. Removing the lockring will make the module move up slightly so it may be removed from the tank. Don't try to bend the float arm when installing the washer.