How to Install the Power Steering Gear Seal on 2008 Dodge Ram 2500?

To install the steering gear seal for 2500 and 3500 models, inspect and replace damaged piston teflon seals. Install the valve, tighten the retainer ring, and clean the housing. Install the valve assembly, input shaft seal, and snap ring. Grease and install the dust seal, then check gear centering before installing the pitman shaft and performing alignment.

OEM 2008 Dodge Ram 2500 Power Steering Gear Seal

Steering Gear Seals

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Power Steering Gear Seals found

View related parts
2008 Dodge Ram 2500 Cover Seal Part Number: 5086848AA
$142.07 MSRP: $180.10
You Save: $38.03 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal; Seal Steering Gear Cover
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.4 x 3.4 x 0.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5086848AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2008 Dodge Ram 2500 Seal Kit, Front Part Number: 5086847AB
Product Specifications
- Other Name: Seal - Pitman Shaft; Steering Gear Rebuild Kit, Front; Power Steering Rebuild Kit; Steering Gear Seal Kit
- Position: Front
- Replaces: 5086847AA
- Item Weight: 0.80 Pounds
- Item Dimensions: 6.1 x 5.3 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5086847AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS, 8.0L V10

2008 Dodge Ram 2500 Power Steering Gear Seal Parts and Q&A

Q: How to Install the Power Steering Gear Seal on 2008 Dodge Ram 2500?
A: To install the steering gear seal for 2500 and 3500 models, inspect and replace damaged piston teflon seals. Install the valve, tighten the retainer ring, and clean the housing. Install the valve assembly, input shaft seal, and snap ring. Grease and install the dust seal, then check gear centering before installing the pitman shaft and performing alignment.