Other Name: Front Seat; Seat Cushion Foam, Center, Front Center; Cushion Front Seat 20% Center 20% Center Cushion; Cushion Front Seat 20% Center Center; Seat Cushion
Position: Front Center
Item Weight: 12.10 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 1FE811D5AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Dodge Ram 2500 Submodels:
Power Wagon, SLT, ST, SXT, Sport | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
Other Name: Seat Cushion - Front Seat; Seat Cushion Foam, Front Center; Cushion Front Seat 20% Center 20% Center Cushion; Cushion Front Seat 20% Center Center; Seat Cushion
Position: Front Center
Item Weight: 12.10 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 1FR271J3AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Dodge Ram 2500 Submodels:
Laramie, SLT, SXT | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
Other Name: Seat Cushion - Front Seat; Seat Cushion Foam, Front Center; Cushion Front Seat 20% Center 20% Center Cushion; Cushion Front Seat 20% Center Center; Seat Cushion
Position: Front Center
Item Weight: 11.60 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 1FR271D5AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Dodge Ram 2500 Submodels:
Laramie, SLT, SXT | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
Other Name: Seat Cushion; Seat Cushion Pad, Front Left, Rear Left; Foam Seat Cushion Driver; Foam Seat Cushion 40%
Position: Front Driver Side
Item Weight: 2.20 Pounds
Item Dimensions: 25.2 x 23.9 x 6.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5183221AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Dodge Ram 2500 Submodels:
Laramie, SLT, SXT | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
| Page 1 of 2 |Next >
1-20 of 33 Results
2008 Dodge Ram 2500 Seat Cushion Parts and Q&A
Q: How to Install a Seat Cushion in a Mega Cab on 2008 Dodge Ram 2500?
A: First, slide the seat cushion foam into the cover, next place the cushion onto the seat pan and then fasten the J-straps to secure the cover in the Mega Cab. After that, set up the seat release lever and fit the cushion assembly onto the seat assembly. First, put in the lower cushion pivot bolts before inserting the upper cushion pivot bolts. Place the release cables using the marks created during removal and then fix the seat back release bezel using a screw. Mount the seat back, tighten it with four bolts, link the lower release cable to the seat back and put in the lower anchor for the center seat belt. In the end, put in both covers for the back section of the seat back, link the J-straps on the bottom of that same section and secure the filler panels in the storage compartment.