How to Remove and Replace Exhaust Valve and Intake Valves on 2008 Dodge Ram 3500?

To replace the intake and exhaust valves, clean them completely and dispose of any damaged ones. Remove carbon from valve guides, measure stem wear, replace if more than 0.051mm. Coat stems with oil, insert stem into cylinder head, and fit new seals, springs and retainers before fitting cylinder head.

OEM 2008 Dodge Ram 3500 Intake Valve

Engine Intake Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Intake Valves found

View related parts
2008 Dodge Ram 3500 Intake Valve Part Number: 5011879AA
$57.01 MSRP: $117.00
You Save: $59.99 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Kit - Intake; Valve Intake Standard Includes Locks And Seals; Valve Intake Standard; Valve Kit Intake
- Item Weight: 0.60 Pounds
- Item Dimensions: 7.3 x 2.1 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5011879AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Ram 3500 Submodels:
- Base, Laramie, SLT, ST, SXT, Sport, TRX4 | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL
View related parts
2008 Dodge Ram 3500 Intake Valve Part Number: 53021550AA
Product Specifications
- Other Name: Valve - Intake; Valve Intake Standard
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.2 x 2.4 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 8
- SKU: 53021550AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT, Sport | 8 Cyl 5.7 L GAS

2008 Dodge Ram 3500 Intake Valve Parts and Q&A

Q: How to Remove and Replace Exhaust Valve and Intake Valves on 2008 Dodge Ram 3500?
A: To replace the intake and exhaust valves, clean them completely and dispose of any damaged ones. Remove carbon from valve guides, measure stem wear, replace if more than 0.051mm. Coat stems with oil, insert stem into cylinder head, and fit new seals, springs and retainers before fitting cylinder head.