How to Install a Parking Assist Distance Sensor on 2008 Dodge Sprinter 2500?

Installation of the parking assist distance sensor requires the fitting of the device itself as well as the O-ring into the sensor receptacle of the bumper with the narrow side of the O-ring in contact with the sensor. Install the strap on top of the latch features, re-fit the wire harness, bumper and battery negative cable.

OEM 2008 Dodge Sprinter 2500 Parking Assist Distance Sensor

Parking Assist Distance Sensor Guide

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Parking Assist Distance Sensors found

View related parts
2008 Dodge Sprinter 2500 Parking Sensor, Rear Part Number: 68010557AC
Product Specifications
- Other Name: Sensor - Parking Assist; Parking Aid Sensor, Front, Rear; Parking Aid Sensor; Parking Sensors; Sensor
- Position: Rear
- Replaces: 68010557AB, 68010557AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.3 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68010557AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 2500 Submodels:
- Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Sprinter 2500 Control Module Part Number: 68078168AA
Product Specifications
- Other Name: Sensor Kit - Parking Assist; Parking Aid Control Module; Control Unit
- Replaces: 68013406AA
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68078168AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 2500 Submodels:
- Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS

2008 Dodge Sprinter 2500 Parking Assist Distance Sensor Parts and Q&A

Q: How to Install a Parking Assist Distance Sensor on 2008 Dodge Sprinter 2500?
A: Installation of the parking assist distance sensor requires the fitting of the device itself as well as the O-ring into the sensor receptacle of the bumper with the narrow side of the O-ring in contact with the sensor. Install the strap on top of the latch features, re-fit the wire harness, bumper and battery negative cable.