How to Install a Shock Absorber on 2008 Dodge Sprinter 3500?

First, link the strut to the steering knuckle and screw the lower bolts down to 140 Nm (103 ft. lbs.) plus an additional 120° turn. Following this, adjust the brake to push the upper strut into your feet area. Strap the wheel speed sensor wire down to the routing clip and fit the rear section of the wheel well liner. Then, put on the wheels, lower the car and secure the upper strut mounting bolts at 28 Nm (21 ft. lbs.). In the end, fit the floor pan, align the screws and mat and do a front wheel alignment.

OEM 2008 Dodge Sprinter 3500 Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Shock Absorbers found

View related parts
2008 Dodge Sprinter 3500 Shock Absorber, Front Part Number: 68039932AB
$430.01 MSRP: $567.00
You Save: $136.99 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber - Shock; Shock Absorber, Front; Shock
- Position: Front
- Replaces: 68013697AA, 68039932AA
- Item Weight: 17.50 Pounds
- Item Dimensions: 26.8 x 5.3 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68039932AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Sprinter 3500 Shock Absorber, Front Part Number: 68013698AA
Product Specifications
- Other Name: Shock; Shock Absorber, Front; Absorber Shock
- Position: Front
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 68013698AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Sprinter 3500 Shock Absorber Part Number: 68020887AA
Product Specifications
- Other Name: Absorber - Shock; Absorber Shock
- Item Weight: 1.10 Pounds
- Item Dimensions: 12.1 x 6.2 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68020887AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Sprinter 3500 Shock, Rear Part Number: 68066615AA
Product Specifications
- Other Name: Absorber - Suspension; Shock Absorber, Rear; Shock Absorber
- Position: Rear
- Replaces: 68017248AA, 68013826AA
- Item Weight: 1.40 Pounds
- Item Dimensions: 24.2 x 3.2 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68066615AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Sprinter 3500 Shock, Rear Part Number: 68066613AA
Product Specifications
- Other Name: Absorber - Suspension; Shock Absorber, Rear; Shock Absorber
- Position: Rear
- Replaces: 68013827AA
- Item Weight: 2.20 Pounds
- Item Dimensions: 10.2 x 2.8 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68066613AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS

2008 Dodge Sprinter 3500 Shock Absorber Parts and Q&A

Q: How to Install a Shock Absorber on 2008 Dodge Sprinter 3500?
A: First, link the strut to the steering knuckle and screw the lower bolts down to 140 Nm (103 ft. lbs.) plus an additional 120° turn. Following this, adjust the brake to push the upper strut into your feet area. Strap the wheel speed sensor wire down to the routing clip and fit the rear section of the wheel well liner. Then, put on the wheels, lower the car and secure the upper strut mounting bolts at 28 Nm (21 ft. lbs.). In the end, fit the floor pan, align the screws and mat and do a front wheel alignment.