How to Replace Hood Hinges Without Removing the Hood on 2008 Dodge Viper?

It is possible to replace just one hood hinge without removing the entire hood. Importantly, after opening the hood, take out the cowl screen. With a grease pencil or its equivalent, mark the spot where the hinge should be attached to the body of the guitar. After that, take out the hood support cylinder and then undo the nuts holding the hinge to the hood. Afterwards, take out the bolts holding the hinge in place and lastly separate the hinge from the car.

OEM 2008 Dodge Viper Hood Hinge

Hood Bracket Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Hood Hinges found

View related parts
2008 Dodge Viper Hinge, Front Driver Side Part Number: 4865639AD
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Left; Hinge Hood
- Position: Front Driver Side
- Replaces: 4865639AC
- Item Weight: 1.70 Pounds
- Item Dimensions: 11.7 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4865639AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
2008 Dodge Viper Hinge, Front Passenger Side Part Number: 4865638AD
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Right; Hinge Hood
- Position: Front Passenger Side
- Replaces: 4865638AC
- Item Weight: 1.70 Pounds
- Item Dimensions: 11.8 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4865638AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS

2008 Dodge Viper Hood Hinge Parts and Q&A

Q: How to Replace Hood Hinges Without Removing the Hood on 2008 Dodge Viper?
A: It is possible to replace just one hood hinge without removing the entire hood. Importantly, after opening the hood, take out the cowl screen. With a grease pencil or its equivalent, mark the spot where the hinge should be attached to the body of the guitar. After that, take out the hood support cylinder and then undo the nuts holding the hinge to the hood. Afterwards, take out the bolts holding the hinge in place and lastly separate the hinge from the car.