How to install a hood hinge on 2009 Dodge Viper?

Place the hood hinge on the car and arrange it with the molded lines that you had previously marked for reference. Fasten the hinge to the hood using nuts turned to 12 Nm and make sure bolts on the other side are also tightened to 28 Nm. When you have finished, open the hood, ensure the body fits well and tighten the front bolts to 28 Nm (21 ft. lbs.), the same as you did for the rear. After that, attach the hood hinge support cylinder and the cowl screen panel.

OEM 2009 Dodge Viper Hood Hinge

Hood Bracket Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Hood Hinges found

View related parts
2009 Dodge Viper Hinge, Front Driver Side Part Number: 4865639AD
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Left; Hinge Hood
- Position: Front Driver Side
- Replaces: 4865639AC
- Item Weight: 1.70 Pounds
- Item Dimensions: 11.7 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4865639AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
2009 Dodge Viper Hinge, Front Passenger Side Part Number: 4865638AD
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Right; Hinge Hood
- Position: Front Passenger Side
- Replaces: 4865638AC
- Item Weight: 1.70 Pounds
- Item Dimensions: 11.8 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4865638AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS

2009 Dodge Viper Hood Hinge Parts and Q&A

Q: How to install a hood hinge on 2009 Dodge Viper?
A: Place the hood hinge on the car and arrange it with the molded lines that you had previously marked for reference. Fasten the hinge to the hood using nuts turned to 12 Nm and make sure bolts on the other side are also tightened to 28 Nm. When you have finished, open the hood, ensure the body fits well and tighten the front bolts to 28 Nm (21 ft. lbs.), the same as you did for the rear. After that, attach the hood hinge support cylinder and the cowl screen panel.