OEM 2008 Jeep Grand Cherokee ABS Control Module

2008 Jeep Grand Cherokee ABS Control Module Parts and Q&A

• Q: How to Install the ABS Control Module for Antilock Brakes on 2008 Jeep Grand Cherokee?

  A: Make sure to program the ABM using a scan tool when you install the Hydraulic Control Unit (HCU) for the Antilock Brakes, since the earlier ABM needs to be reprogrammed. To start, set the three ABM bolts into the HCU and fasten them to a reading of 12 Nm or 9 ft. lbs. Attach the adapter (HCU) with the bracket to the vehicle and fasten it with the two mounting nuts. The four chassis lines should be linked in the HCU and then install the secondary brake line at both the HCU and master cylinder. After that, attach the initial brake line to the HCU and to the master cylinder. Attach the HCU beater wire and then link the negative battery wire to the battery. Once done, remove the brake pedal prop rod and flush the base and ABS brake systems.