How to Detach a Wiper Arm on 2009 Chrysler 300?

To detach the wiper arm, start by removing the nut caps. Then, take off the retaining nuts. Use a two-jaw puller to separate the wiper arm from the pivot, and finally, remove the wiper arms.

OEM 2009 Chrysler 300 Wiper Arm

Windshield Wiper Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Arms found

View related parts
2009 Chrysler 300 Wiper Arm, Front Driver Side Part Number: 5139094AB
Product Specifications
- Other Name: Arm - Front Wiper; Windshield Wiper Arm, Left; Front Arm
- Position: Front Driver Side
- Replaces: 5139094AA
- Item Weight: 1.30 Pounds
- Item Dimensions: 2.2 x 4.2 x 22.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5139094AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- Base, C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2009 Chrysler 300 Wiper Arm, Front Passenger Side Part Number: 5139093AB
Product Specifications
- Other Name: Arm - Front Wiper; Windshield Wiper Arm, Right; Front Arm
- Position: Front Passenger Side
- Replaces: 5139093AA
- Item Weight: 1.20 Pounds
- Item Dimensions: 2.3 x 3.1 x 21.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5139093AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- Base, C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2009 Chrysler 300 Wiper Arm Parts and Q&A

Q: How to Detach a Wiper Arm on 2009 Chrysler 300?
A: To detach the wiper arm, start by removing the nut caps. Then, take off the retaining nuts. Use a two-jaw puller to separate the wiper arm from the pivot, and finally, remove the wiper arms.