OEM 2009 Chrysler 300 Wiper Motor

2009 Chrysler 300 Wiper Motor Parts and Q&A

• Q: How to Remove a Wiper Motor on 2009 Chrysler 300?

  A: First, shut off the negative battery cable to remove the wiper motor. After that, get rid of the front wiper module. When removing the motor from the linkage, keep the bellcrank nut in place, so your motor cam timing does not change and you do not need a new motor. The wiper motor comes with the bellcrank already added by Mopar(R). On a bench or vise, hold down the front wiper module with a screwdriver, flat bar or a similar tool and pull the linkage off the bellcrank. After that, take out the two bolts that connect the motors to the case. When separating the motor from the linkage, don't lose the two pocket nuts as you'll need them for reinstallation. Ultimately, remove the wiper motor from the wiper module or linkage.