How to Remove Car Speakers and Subwoofers in Sedans and Convertibles on 2009 Chrysler PT Cruiser?

To take out the speaker, unplug the negative battery cable, take off the door panel and then unscrew the speaker parts. After you're done, take out the speaker and remove the wire harness connector. For this type, unhook and isolate the battery negative cable, remove the panel top cover, screw out the speaker retaining screws and remove the speaker as well as the wire connector at the end. For removing the rear speaker in a sedan, turn off the car, disconnect the negative side of the battery, remove the trim on the rear pillar, remove the four screws holding the speaker and then pull the speaker out and disattach the wire connector. First, detach and divide the battery negative cable, take away the quarter trim panel, disconnect the fasteners and then take the subwoofer as well as its electrical cable out of the vehicle. Steps to remove a subwoofer in a convertible are the same: first isolate the battery negative cable, take out the quarter panel edge, unscrew the mounting bolts and remove both the subwoofer and the electrical harness connector.

OEM 2009 Chrysler PT Cruiser Car Speakers

Audio Speakers

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Car Speakers found

View related parts
2009 Chrysler PT Cruiser Rear Speaker, Front Part Number: 5081670AB
$72.12 MSRP: $111.00
You Save: $38.88 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Speaker; Speaker, Center Front, Center Rear, Front, Rear; Quarter Panel Speaker; Front Driver Speaker; Rear Driver Speaker; Speaker 6.5" Rear Door; Speaker 6.5"
- Position: Front
- Item Weight: 2.30 Pounds
- Item Dimensions: 8.3 x 8.3 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5081670AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler PT Cruiser Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
2009 Chrysler PT Cruiser Rear Driver Speaker Part Number: 4714604AB
$2.85 MSRP: $16.40
You Save: $13.55 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Speaker; Speaker Rear Door; Speaker 6.5"
- Item Weight: 2.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4714604AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2009 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, LX, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
2009 Chrysler PT Cruiser Rear Driver Speaker Part Number: 4714603AB
$5.00 MSRP: $28.70
You Save: $23.70 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Speaker - Rear Door; Speaker Rear Door
- Position: Rear
- Item Weight: 2.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4714603AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler PT Cruiser Submodels:
- Base, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
2009 Chrysler PT Cruiser Front Driver Speaker Part Number: 5091040AA
$48.84 MSRP: $72.40
You Save: $23.56 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Speaker; Speaker, Center, Front, Rear; Rear Driver Speaker; Speaker 6.5"
- Position: Front
- Replaces: 4672455AB
- Item Weight: 1.50 Pounds
- Item Dimensions: 7.1 x 7.0 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5091040AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
2009 Chrysler PT Cruiser Instrument Panel Speaker, Front Part Number: 5059068AB
Product Specifications
- Other Name: Speaker; Speaker, Front, Front Inner; Front Driver Speaker; Speaker Instrument Panel Also Used On Liftgate; Speaker Instrument Panel; Speaker 3.5"
- Position: Front
- Item Weight: 1.10 Pounds
- Item Dimensions: 3.9 x 3.8 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5059068AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler PT Cruiser Submodels:
- Base, GT, LX, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
2009 Chrysler PT Cruiser Woofer Part Number: 4672384AB
Product Specifications
- Other Name: Speaker - Sub Woofer; Speaker Sub Woofer
- Item Weight: 11.40 Pounds
- Item Dimensions: 29.6 x 16.6 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4672384AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler PT Cruiser Submodels:
- Base, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS

2009 Chrysler PT Cruiser Car Speakers Parts and Q&A

Q: How to Remove Car Speakers and Subwoofers in Sedans and Convertibles on 2009 Chrysler PT Cruiser?
A: To take out the speaker, unplug the negative battery cable, take off the door panel and then unscrew the speaker parts. After you're done, take out the speaker and remove the wire harness connector. For this type, unhook and isolate the battery negative cable, remove the panel top cover, screw out the speaker retaining screws and remove the speaker as well as the wire connector at the end. For removing the rear speaker in a sedan, turn off the car, disconnect the negative side of the battery, remove the trim on the rear pillar, remove the four screws holding the speaker and then pull the speaker out and disattach the wire connector. First, detach and divide the battery negative cable, take away the quarter trim panel, disconnect the fasteners and then take the subwoofer as well as its electrical cable out of the vehicle. Steps to remove a subwoofer in a convertible are the same: first isolate the battery negative cable, take out the quarter panel edge, unscrew the mounting bolts and remove both the subwoofer and the electrical harness connector.