How to Install the Wiper Pivot Linkage on 2009 Chrysler Sebring?

To install the wiper motor linkage, wire connector 2 is connected, assembly is positioned and three mounting bolts are tightened to 11 Nm. Then, install the cowl screen, wiper arms and blades. Finally reconnect the battery negative cable and adjust wiper arms if necessary.

OEM 2009 Chrysler Sebring Wiper Pivot

Windshield Wiper Pivot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Pivots found

View related parts
2009 Chrysler Sebring Wiper Transmission Part Number: 68020539AA
$137.14 MSRP: $277.00
You Save: $139.86 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Linkage - Wiper; Windshield Wiper Linkage; Wiper Linkage; Pivot And Linkage Wiper
- Item Weight: 6.80 Pounds
- Item Dimensions: 45.7 x 8.0 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68020539AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Sebring Submodels:
- LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Chrysler Sebring Wiper Transmission Part Number: 68003830AA
Product Specifications
- Other Name: Linkage - Wiper; Windshield Wiper Linkage; Wiper Linkage; Pivot And Linkage Wiper
- Item Weight: 5.70 Pounds
- Item Dimensions: 48.3 x 8.2 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003830AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2009 Chrysler Sebring Wiper Pivot Parts and Q&A

Q: How to Install the Wiper Pivot Linkage on 2009 Chrysler Sebring?
A: To install the wiper motor linkage, wire connector 2 is connected, assembly is positioned and three mounting bolts are tightened to 11 Nm. Then, install the cowl screen, wiper arms and blades. Finally reconnect the battery negative cable and adjust wiper arms if necessary.