Other Name: Bulb; Center Stop; Turn/Parking; Plate; Side Marker; Daytime Running; Tail & Headlight; Tail Lamp Bulb; various exterior and interior bulbs including W5W and W10/5 types.
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Dodge Caliber Submodels:
Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
2009 Dodge Caliber Headlight Bulb Parts and Q&A
Q: How to Replace a Headlight Bulb on 2009 Dodge Caliber?
A: Before working on the headlamp bulb, detach the negative cable of the battery and raise the car. Place the panel in the suitable wheel well and loosen the front part of the splash shield without taking it off. The front wheel well will show you which bulb to replace; the headlamp bulb is on the inside and the turn/park signal bulb is on the outside. Take out the electrical connection for the bulb. If the headlamp on an export vehicle needs swapping out, release the spring clip and then pull the bulb straight toward the back after removing the rubber cover around the rear of the lamp housing. When it's time, hold the bulb, twist it counterclockwise one quarter turn and gently pull it from the lamp unit.