How to Replace a Headlight Bulb on 2010 Dodge Caliber?

You can reach the headlamp bulb by removing the inner fender well under the hood, but the park/turn signal bulb is on the outside and can only be accessed by removing the inner fender well. Climb up into the wheel well and, while holding the lamp, slip it into the front lamp unit, then twist it clockwise one-fourth turn to lock it in place. On vehicles going for export, push the bulb firmly into the unit, add the spring clip and then place the rubber cover at the back of the lamp. After that, attach the electrical connector from the bulb to the car's sockets (connectors 2 or 3). Put back the front of the splash shield (6) after replacing the bulbs in the headlights. When finished, unhook the Lisa and put the vehicle on the ground again. Attach the negative battery cable.

OEM 2010 Dodge Caliber Headlight Bulb

Headlamp Bulb

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Headlight Bulbs found

View related parts
2010 Dodge Caliber Headlamp Bulb, Rear Part Number: L002825W5W
$7.42 MSRP: $10.70
You Save: $3.28 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb; Center Stop; Turn/Parking; Plate; Side Marker; Daytime Running; Tail & Headlight; Tail Lamp Bulb; various exterior and interior bulbs including W5W and W10/5 types.
- Position: Rear
- Replaces: 153625, L2825W5WLL, 68317490AA, 5104608AA, 5104648AA, MS820090
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.8 x 2.0 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: L002825W5W
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2010 Dodge Caliber Turn Signal Bulb Part Number: 68604853AA
$12.60 MSRP: $18.45
You Save: $5.85 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb; Backup Lamp Bulb; Signal Lamp Bulb; Marker Lamp Bulb; Exterior Bulbs; Stoplamp Bulb; Taillamp Bulb; Bulbs
- Replaces: L0003757AK
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68604853AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2010 Dodge Caliber Headlamp Bulb Part Number: 68604855AA
$29.76 MSRP: $44.10
You Save: $14.34 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; High Beam Bulb
- Replaces: L0000H13
- Item Weight: 1.30 Pounds
- Item Dimensions: 9.2 x 4.3 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68604855AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2010 Dodge Caliber Headlight Bulb Parts and Q&A

Q: How to Replace a Headlight Bulb on 2010 Dodge Caliber?
A: You can reach the headlamp bulb by removing the inner fender well under the hood, but the park/turn signal bulb is on the outside and can only be accessed by removing the inner fender well. Climb up into the wheel well and, while holding the lamp, slip it into the front lamp unit, then twist it clockwise one-fourth turn to lock it in place. On vehicles going for export, push the bulb firmly into the unit, add the spring clip and then place the rubber cover at the back of the lamp. After that, attach the electrical connector from the bulb to the car's sockets (connectors 2 or 3). Put back the front of the splash shield (6) after replacing the bulbs in the headlights. When finished, unhook the Lisa and put the vehicle on the ground again. Attach the negative battery cable.