How to Remove the Brake Light Switch on 2009 Dodge Challenger?

Press and hold the brake pedal to eliminate the stop lamp switch. Turn the switch anti-clockwise 30 degrees and then take it off the assembly of brake pads. And lastly, unconnect the wire harness connector to the switch.

OEM 2009 Dodge Challenger Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2009 Dodge Challenger Brake Switch Part Number: 4671336AD
$39.68 MSRP: $53.75
You Save: $14.07 (27%)
ADD TO CART
Product Specifications
- Other Name: Switch - Stop Lamp; Brake Light Switch; Stop Light Switch; Brake Pedal Switch; Lamp Switch; Release Switch; Stoplamp Switch; Switch; Switch Stop Lamp
- Replaces: 4671336, 4671336AC, 4671336AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.6 x 2.0 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4671336AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Challenger Submodels:
- 392 Hemi Scat Pack Shaker, R/T, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Shaker, Rallye Redline, SE, SRT 392, SRT Hellcat, SRT8, SXT, SXT Plus, Scat Pack | 3.5L V6, 3.6L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

2009 Dodge Challenger Brake Light Switch Parts and Q&A

Q: How to Remove the Brake Light Switch on 2009 Dodge Challenger?
A: Press and hold the brake pedal to eliminate the stop lamp switch. Turn the switch anti-clockwise 30 degrees and then take it off the assembly of brake pads. And lastly, unconnect the wire harness connector to the switch.