How to Install a Knock Sensor on a 3.5L Engine on 2009 Dodge Challenger?

To install the 3.5L engine's knock sensor, tighten it to 20 Nm (15 ft. lbs.) and install the wire before installing the intake manifold. After fixing the manifold, connect the electrical connector, and then reconnect the negative battery cable and tighten the nut to 5Nm (45 in.lbs.).

OEM 2009 Dodge Challenger Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Knock Sensors found

View related parts
2009 Dodge Challenger Knock Sensor Part Number: 4606093AD
$103.54 MSRP: $157.00
You Save: $53.46 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Detonation; Ignition Knock (Detonation) Sensor; Sensor; Sensor Detonation
- Replaces: 4606093
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.3 x 2.7 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4606093AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Challenger Submodels:
- SE | 6 Cyl 3.5 L GAS
View related parts
2009 Dodge Challenger Knock Sensor Part Number: 5033316AB
$128.23 MSRP: $194.00
You Save: $65.77 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; MAP Sensor; Sensor Knock
- Replaces: 5033316AA, 56028563AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.1 x 1.3 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5033316AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Challenger Submodels:
- 392 Hemi Scat Pack Shaker, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, SRT 392, SRT Hellcat, SRT8, Scat Pack, T/A, T/A 392, T/A 392 Widebody | 5.7L V8, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

2009 Dodge Challenger Knock Sensor Parts and Q&A

Q: How to Install a Knock Sensor on a 3.5L Engine on 2009 Dodge Challenger?
A: To install the 3.5L engine's knock sensor, tighten it to 20 Nm (15 ft. lbs.) and install the wire before installing the intake manifold. After fixing the manifold, connect the electrical connector, and then reconnect the negative battery cable and tighten the nut to 5Nm (45 in.lbs.).