How is a Knock Sensor Installed on 2008 Dodge Challenger?

To install the knock sensor, set it on the cylinder block without adhering to the bolts. Tighten the mounting bolt to 20 Nm, connect the electrical connector, install the heat shield and reconnect the negative battery cable, tightening the nut to 5 Nm.

OEM 2008 Dodge Challenger Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2008 Dodge Challenger Knock Sensor Part Number: 5033316AB
$128.23 MSRP: $194.00
You Save: $65.77 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; MAP Sensor; Sensor Knock
- Replaces: 5033316AA, 56028563AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.1 x 1.3 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5033316AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Challenger Submodels:
- 392 Hemi Scat Pack Shaker, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, SRT 392, SRT Hellcat, SRT8, Scat Pack, T/A, T/A 392, T/A 392 Widebody | 5.7L V8, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

2008 Dodge Challenger Knock Sensor Parts and Q&A

Q: How is a Knock Sensor Installed on 2008 Dodge Challenger?
A: To install the knock sensor, set it on the cylinder block without adhering to the bolts. Tighten the mounting bolt to 20 Nm, connect the electrical connector, install the heat shield and reconnect the negative battery cable, tightening the nut to 5 Nm.