How to Install an Oil Pressure Switch for a Fuel Pump on 2009 Dodge Challenger?

To install the Oil Pressure Switch of the fuel pump, apply Mopar(R) Thread Sealant to the threads. Put the switch on the fitting and put in the electrical connector. After lowering the vehicle, turn on the engine to see if there are any leaks, and add engine oil if necessary.

OEM 2009 Dodge Challenger Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Pressure Switches found

View related parts
2009 Dodge Challenger Oil Pressure Sensor Part Number: 5149062AB
$58.92 MSRP: $86.70
You Save: $27.78 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Gauge Switch; Oil Pressure Switch; Pressure Switch; Pressure Sensor; Oil Pressure Sending Unit; Sending Unit
- Replaces: 5149062AA, 68060337AA
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.2 x 6.1 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5149062AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Challenger Submodels:
- 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Shaker, Rallye Redline, SE, SRT 392, SRT Hellcat, SRT8, SXT, SXT Plus, Scat Pack, T/A, T/A 392 | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
2009 Dodge Challenger Switch - Oil Pressure Part Number: 5149098AB
$40.91 MSRP: $55.60
You Save: $14.69 (27%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2009 Dodge Challenger Submodels:
- SE | 3.5L V6, 6 Cyl 3.5 L GAS

2009 Dodge Challenger Oil Pressure Switch Parts and Q&A

Q: How to Install an Oil Pressure Switch for a Fuel Pump on 2009 Dodge Challenger?
A: To install the Oil Pressure Switch of the fuel pump, apply Mopar(R) Thread Sealant to the threads. Put the switch on the fitting and put in the electrical connector. After lowering the vehicle, turn on the engine to see if there are any leaks, and add engine oil if necessary.