Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2008 Dodge Challenger Oil Pressure Switch

Oil Pressure Sender Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

  • 2008 Dodge Challenger Oil Pressure Switch - 5149062AB
    2008 Dodge Challenger Oil Pressure Switch - 5149062AB
    2008 Dodge Challenger Oil Pressure Switch - 5149062AB
    2008 Dodge Challenger Oil Pressure Switch - 5149062AB
    2008 Dodge Challenger Oil Pressure Switch - 5149062AB
    2008 Dodge Challenger Oil Pressure Switch Diagram - 5149062AB
    View related parts

    2008 Dodge Challenger Oil Pressure Sensor Part Number: 5149062AB

    $58.92 MSRP: $86.70
    You Save: $27.78 (33%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Gauge Switch; Oil Pressure Switch; Pressure Switch; Pressure Sensor; Oil Pressure Sending Unit; Sending Unit
    • Replaces: 5149062AA, 68060337AA
    • Item Weight: 1.40 Pounds
    • Item Dimensions: 7.2 x 6.1 x 4.8 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5149062AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2008 Dodge Challenger Submodels:
    • 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Shaker, Rallye Redline, SE, SRT 392, SRT Hellcat, SRT8, SXT, SXT Plus, Scat Pack, T/A, T/A 392 | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

2008 Dodge Challenger Oil Pressure Switch Parts and Q&A

  • Q: How to Install an Oil Pressure Switch and Accessory Drive Belt on 2008 Dodge Challenger?
    A: Use Mopar(R) Thread Sealant with PTFE on the sensor threads and then fix the sensor into position on the engine block. After that, attach the oil pressure sensor and link the oil pressure sensor electrical connector. Site your generator and install the upper mounting bolt so it fits in the hole, but do not tighten it. Lift the vehicle, fit the lower bolts and tighten them to 55 Nm (41 ft. lbs). Place the lower splash shield and insert the retaining bolts. Drop the vehicle and tighten the generator mounting bolt from the top to 55 Nm (41 ft. lbs). Ensure that the serpentine accessory drive belt is fitted correctly, because letting the water pump spin in reverse could cause your engine to overheat. After that, connect the accessory drive belt and hook up the negative battery cable.

Related 2008 Dodge Challenger Parts

Alternate Year Models

+
2009 Dodge Challenger Oil Pressure Switch