How to Install a Sunroof on 2009 Dodge Challenger?

Installation of the sunroof glass requires placing the sunroof glass in place on the lift arms keeping tabs that are tabs. Turn on the screws and add a 12v power outlet to test the closed position. Align the glass with the roof, screw the screws to 5.5 Nm and install the mechanism covers. Check functionality and alignment.

OEM 2009 Dodge Challenger Sunroof

Moonroof

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Sunroof found

View related parts
2009 Dodge Challenger Sunroof Glass Part Number: 68301072AA
$637.77 MSRP: $930.00
You Save: $292.23 (32%)
ADD TO CART
Product Specifications
- Other Name: Glass - Sunroof; Glass Sunroof
- Replaces: 68036052AA
- Item Weight: 16.20 Pounds
- Item Dimensions: 39.9 x 24.5 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68301072AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Challenger Submodels:
- 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, Rallye Redline, SE, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, SXT, SXT Plus, Scat Pack, T/A, T/A 392, T/A 392 Widebody | 3.5L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

2009 Dodge Challenger Sunroof Parts and Q&A

Q: How to Install a Sunroof on 2009 Dodge Challenger?
A: Installation of the sunroof glass requires placing the sunroof glass in place on the lift arms keeping tabs that are tabs. Turn on the screws and add a 12v power outlet to test the closed position. Align the glass with the roof, screw the screws to 5.5 Nm and install the mechanism covers. Check functionality and alignment.