How is a Sunroof Glass Installed on 2008 Dodge Challenger?

Installing the sunroof glass, to install the sunroof glass, place it on the lift arms making sure that retaining tabs remain intact. Turn on the screws and attach a 12v power supply to test the closed position. Lay the glass level to the roof, screw in to 5.5 Nm, and attach the covers of the mechanisms. Checking functioning and orientation.

OEM 2008 Dodge Challenger Sunroof

Moonroof

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Sunroof found

View related parts
2008 Dodge Challenger Sunroof Glass Part Number: 68301072AA
$637.77 MSRP: $930.00
You Save: $292.23 (32%)
ADD TO CART
Product Specifications
- Other Name: Glass - Sunroof; Glass Sunroof
- Replaces: 68036052AA
- Item Weight: 16.20 Pounds
- Item Dimensions: 39.9 x 24.5 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68301072AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Challenger Submodels:
- 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, Rallye Redline, SE, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, SXT, SXT Plus, Scat Pack, T/A, T/A 392, T/A 392 Widebody | 3.5L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

2008 Dodge Challenger Sunroof Parts and Q&A

Q: How is a Sunroof Glass Installed on 2008 Dodge Challenger?
A: Installing the sunroof glass, to install the sunroof glass, place it on the lift arms making sure that retaining tabs remain intact. Turn on the screws and attach a 12v power supply to test the closed position. Lay the glass level to the roof, screw in to 5.5 Nm, and attach the covers of the mechanisms. Checking functioning and orientation.