Other Name: Handle - Exterior Door; Exterior Door Handle, Rear Left Outer; Handle Exterior Door; Exterior Door Handle
Position: Rear Outer Driver Side
Replaces: YS97ARHAE, YS97ARHAB, YS97ARHAD
Item Weight: 1.00 Pounds
Item Dimensions: 10.1 x 4.1 x 4.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: YS97ARHAF
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Dodge Charger Submodels:
Base, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
| Page 1 of 2 |Next >
1-20 of 40 Results
2009 Dodge Charger Door Handle Parts and Q&A
Q: How to Detach a Rear Exterior Door Handle on 2009 Dodge Charger?
A: Before removing the rear exterior door handle, remove the trim panel that is inside the rear door. After that, remove the watershield from the inside part of the door. Once that's done, take out the door glass channel and bracket from the inside. After that, remove the latch that you can see inside the rear door. After that, remove the three screws that hold the outside handle onto the door. Remove the handle from the face of the door as the next step.