How to Remove a Front Door Window Regulator on 2009 Dodge Charger?

Before you remove the window regulator, take out the inside door trim, the speaker and the watershield together. Proceed by taking out the screw under the bottom of the pull cup bracket and the window regulator rear rail. Remove the screw that holds the top of the bracket onto the pull cup and take out the bracket from the keyed hole. Page 19. Next, adjust the position of the front door glass using the regulator to get to the two window regulator glass clamps and loosen each glass clamp's screw enough so the glass can be removed. Take the glass out of the clamps and tape it all the way up. Turn out the two bolts on the side rails that attach the front regulator rail and the regulator motor bracket to the door. Detach the screws at the tops of the regulator rails from the keyed holes inside the door, then pull up on the front regulator rail to separate the screw from its keyed hole. Get to the connector on the door wire harness by lowering the front regulator rail and then disconnect the connector from the regulator motor through the speaker hole. Press up on the rear regulator rail to unlock it from the keyed hole and withdraw the regulator through the sizable access hole inside the door at the rear.

OEM 2009 Dodge Charger Window Regulator

Electric Power Window Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Window Regulators found

View related parts
2009 Dodge Charger Window Regulator, Rear Passenger Side Part Number: 5065472AF
$133.69 MSRP: $198.00
You Save: $64.31 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Rear Door Window; Window Regulator, Rear Right; Regulator Rear Door Window
- Position: Rear Passenger Side
- Replaces: 5065472AE, 5065472AD, 5065472AB, 5065472AC
- Item Weight: 4.60 Pounds
- Item Dimensions: 22.8 x 11.9 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5065472AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Charger Submodels:
- Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2009 Dodge Charger Window Regulator, Front Driver Side Part Number: 5065471AF
$476.03 MSRP: $627.00
You Save: $150.97 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Front Door Window; Window Regulator, Front Left; Regulator Front Door Window
- Position: Front Driver Side
- Replaces: 5065471AC, 5065471AE, 5065471AD
- Item Weight: 5.90 Pounds
- Item Dimensions: 24.4 x 20.9 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5065471AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Charger Submodels:
- Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2009 Dodge Charger Window Regulator, Front Passenger Side Part Number: 5065474AE
$281.78 MSRP: $426.00
You Save: $144.22 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Front Door Window; Window Regulator, Front Right, Rear Right; Regulator Front Door Window
- Position: Front Passenger Side
- Replaces: 5065474AD, 5065474AC
- Item Weight: 6.10 Pounds
- Item Dimensions: 4.4 x 21.7 x 24.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5065474AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Charger Submodels:
- Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2009 Dodge Charger Window Regulator, Front Driver Side Part Number: 5065475AE
$287.30 MSRP: $434.00
You Save: $146.70 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Front Door Window; Window Regulator, Front Left, Rear Left; Regulator Front Door Window
- Position: Front Driver Side
- Replaces: 5065475AD, 5065475AC
- Item Weight: 5.70 Pounds
- Item Dimensions: 4.4 x 21.7 x 24.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5065475AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Charger Submodels:
- Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2009 Dodge Charger Window Regulator, Rear Driver Side Part Number: 5065473AF
$251.53 MSRP: $371.00
You Save: $119.47 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Rear Door Window; Window Regulator, Rear Left; Regulator Rear Door Window
- Position: Rear Driver Side
- Replaces: 5065473AD, 5065473AC, 5065473AE, 5065473AB
- Item Weight: 4.20 Pounds
- Item Dimensions: 22.8 x 12.1 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5065473AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Charger Submodels:
- Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2009 Dodge Charger Window Regulator, Front Passenger Side Part Number: 5065470AF
Product Specifications
- Other Name: Regulator - Front Door Window; Window Regulator, Front Right; Regulator Front Door Window
- Position: Front Passenger Side
- Replaces: 5065470AD, 5065470AE, 5065470AC
- Item Weight: 6.20 Pounds
- Item Dimensions: 4.5 x 21.3 x 25.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5065470AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Charger Submodels:
- Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2009 Dodge Charger Window Regulator Parts and Q&A

Q: How to Remove a Front Door Window Regulator on 2009 Dodge Charger?
A: Before you remove the window regulator, take out the inside door trim, the speaker and the watershield together. Proceed by taking out the screw under the bottom of the pull cup bracket and the window regulator rear rail. Remove the screw that holds the top of the bracket onto the pull cup and take out the bracket from the keyed hole. Page 19. Next, adjust the position of the front door glass using the regulator to get to the two window regulator glass clamps and loosen each glass clamp's screw enough so the glass can be removed. Take the glass out of the clamps and tape it all the way up. Turn out the two bolts on the side rails that attach the front regulator rail and the regulator motor bracket to the door. Detach the screws at the tops of the regulator rails from the keyed holes inside the door, then pull up on the front regulator rail to separate the screw from its keyed hole. Get to the connector on the door wire harness by lowering the front regulator rail and then disconnect the connector from the regulator motor through the speaker hole. Press up on the rear regulator rail to unlock it from the keyed hole and withdraw the regulator through the sizable access hole inside the door at the rear.