Other Name: Radiator - Engine Cooling; Radiator Engine Cooling, 25 Pc Min Qty, Mixture And Match Pallet Program Only, Order at Mopar.com.
Replaces: 55056978AB
Item Weight: 21.50 Pounds
Item Dimensions: 34.3 x 29.0 x 9.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 55056978AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
Limited, Limited Hybrid, SE, SLT | 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
2009 Dodge Durango Radiator Parts and Q&A
Q: How to Remove and Replace a Radiator for 3.7L, 4.7L, and 5.7L Engines on 2009 Dodge Durango?
A: Before you remove the engine cooling radiator for 3.7L, 4.7L and 5.7L trucks, first unhook the negative battery cable and empty the cooling system. At this point, take out the pushpins and get rid of the condenser/radiator seal beside the air filter housing assembly. Remove the upper radiator hose and the overflow tube and set the radiator fan shroud onto the radiator fan. Take out the top radiator support, lift and support the whole vehicle and separate the power steering cooler lines and the transmission cooler lines. Disconnect the lower radiator hose, drop the vehicle and pull out the upper radiator mount plus the left and right radiator side seals. After that, disconnect the radiator and, if needed, remove the power steering cooler and transmission cooler.