How to Service and Repair a Relay Block on 2009 Dodge Durango?

The first step in servicing or repairing the relay box is to disconnect the battery negative cable, so the box is isolated. After that, lift the left side cowl trim cover and remove the three fasteners from the mount. Discharge your vehicle, then separate the electrical harness connectors and move out Junction Block 1.

OEM 2009 Dodge Durango Relay Block

Relay Fuse Box

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Relay Blocks found

View related parts
2009 Dodge Durango Distribution Box, Center Part Number: 4692227AA
Product Specifications
- Other Name: Center; Fuse and Relay Center; Fuse Box; Power Distribution Center
- Position: Center
- Item Weight: 2.90 Pounds
- Item Dimensions: 11.4 x 7.4 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4692227AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
- Limited, Limited Hybrid, SE, SLT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Durango Junction Block Part Number: 56049173AG
Product Specifications
- Other Name: Block - Relay; Fuse Box; Junction Boxes; Relay Boxes; Junction Block Relay
- Item Weight: 2.30 Pounds
- Item Dimensions: 13.8 x 9.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56049173AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2009 Dodge Durango Relay Block Parts and Q&A

Q: How to Service and Repair a Relay Block on 2009 Dodge Durango?
A: The first step in servicing or repairing the relay box is to disconnect the battery negative cable, so the box is isolated. After that, lift the left side cowl trim cover and remove the three fasteners from the mount. Discharge your vehicle, then separate the electrical harness connectors and move out Junction Block 1.