How to Install Seat Heater Elements in the Second Row on 2009 Dodge Durango?

Begin by pulling back the adhesive backing on the heater element and place it in the same spot on the seat as the old element, being sure not to bend or when handling it. Join the heated seat cushion's electrical connector and fix the harness routing clip on the bottom of the rear center console bracket which is located under the floor. Then, put in the rear center console, tie off the negative battery cable and make sure the heated rear seats are functioning well. Install the cushion cover last, placing the seat wire harness in the seat and seat back and make sure the extra wire is hidden between the back of the cushion foam and the trim cover's rear carpet flap when you are done. For the heated second row seat back element, pull off the adhesive from the new element and put it back in the factory position, attaching the connector (3) and the routing clip. With everything sorted out, place the back trim cover (1) correctly on the seat and make sure the extra wire is not in the way.

OEM 2009 Dodge Durango Seat Heater

Seat Warmer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Seat Heaters found

View related parts
2009 Dodge Durango Element Part Number: 68019020AA
Product Specifications
- Other Name: Pad - Heater; Pad Heater Seat Cushion; Pad Heater Cushion
- Item Weight: 1.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68019020AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2009 Dodge Durango Submodels:
- Limited Hybrid | 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV)
View related parts
2009 Dodge Durango Element Part Number: 68019019AA
Product Specifications
- Other Name: Pad - Heater; Pad Heater Seat Back
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68019019AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2009 Dodge Durango Submodels:
- Limited Hybrid | 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV)
View related parts
2009 Dodge Durango Seat Back Heater, Upper Part Number: 5000014AB
Product Specifications
- Other Name: Pad; Seat Heater Pad, Front, Upper; Element; Heater Back; Seat Heater
- Position: Upper
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5000014AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
- Limited, Limited Hybrid, SE, SLT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Durango Seat Cushion Heater, Lower Part Number: 5000013AB
Product Specifications
- Other Name: Seat Heater Pad, Front, Lower; Element; Heater Cushion; Seat Heater
- Position: Lower
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.4 x 7.4 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5000013AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Durango Seat Back Heater, Upper Part Number: 5000014AA
Product Specifications
- Other Name: Pad; Seat Heater Pad, Front, Upper; Element; Heater Back; Seat Heater
- Position: Upper
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5000014AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
- Adventurer, Limited, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2009 Dodge Durango Seat Heater Parts and Q&A

Q: How to Install Seat Heater Elements in the Second Row on 2009 Dodge Durango?
A: Begin by pulling back the adhesive backing on the heater element and place it in the same spot on the seat as the old element, being sure not to bend or when handling it. Join the heated seat cushion's electrical connector and fix the harness routing clip on the bottom of the rear center console bracket which is located under the floor. Then, put in the rear center console, tie off the negative battery cable and make sure the heated rear seats are functioning well. Install the cushion cover last, placing the seat wire harness in the seat and seat back and make sure the extra wire is hidden between the back of the cushion foam and the trim cover's rear carpet flap when you are done. For the heated second row seat back element, pull off the adhesive from the new element and put it back in the factory position, attaching the connector (3) and the routing clip. With everything sorted out, place the back trim cover (1) correctly on the seat and make sure the extra wire is not in the way.