How to Service and Repair a Throttle Body on 2009 Dodge Durango?

Use a diagnostic tool to gather and record any past DTC's (Diagnostic Trouble Codes) before starting any service or repair on the throttle body. Keep the ignition in the OFF position when you check for binding at the throttle body shaft, as it could otherwise cause DTC's. A factory set screw on the throttle control changes only the throttle position and should not be used to alter idle speed which the PCM sets. To start, remove the negative battery cable from the battery at its connection. After that, take out the air intake tube from the throttle body flange. Remove the throttle body electrical connection and vacuum hoses that are needed. After that, remove the four bolts holding the throttle body mount, then lift the throttle body from its place on the intake manifold. In addition, examine the o-ring on the old throttle body-to-intake manifold.

OEM 2009 Dodge Durango Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Throttle Bodies found

View related parts
2009 Dodge Durango Throttle Body Part Number: 53032837AB
$316.11 MSRP: $465.00
You Save: $148.89 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body Assembly; Electronic Throttle Body Module
- Replaces: 53032837AA
- Item Weight: 2.40 Pounds
- Item Dimensions: 6.1 x 6.8 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032837AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
- Adventurer, Limited, SE, SLT, SXT | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2009 Dodge Durango Throttle Body Part Number: 4591847AC
$308.30 MSRP: $471.00
You Save: $162.70 (35%)
ADD TO CART
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body Assembly
- Replaces: 68060354AA, 4591847AB
- Item Weight: 2.50 Pounds
- Item Dimensions: 6.3 x 6.9 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4591847AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
- Citadel, Crew, Limited Hybrid, R/T, Special Service | 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Durango Throttle Body Part Number: 4861661AB
$375.56 MSRP: $552.00
You Save: $176.44 (32%)
ADD TO CART
Product Specifications
- Other Name: Throttle; Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body.
- Replaces: 4861661AA
- Item Weight: 3.50 Pounds
- Item Dimensions: 5.0 x 5.9 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4861661AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
- SE, SLT, SXT | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2009 Dodge Durango Throttle Body Part Number: 53032801AC
$425.94 MSRP: $626.00
You Save: $200.06 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body Module.
- Replaces: 53032801AA, 53032801AB, 68060353AA
- Item Weight: 3.00 Pounds
- Item Dimensions: 7.0 x 7.1 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032801AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
- Adventurer, Limited, SE, SLT, ST, SXT | 5.7L V8, 8 Cyl 5.7 L GAS

2009 Dodge Durango Throttle Body Parts and Q&A

Q: How to Service and Repair a Throttle Body on 2009 Dodge Durango?
A: Use a diagnostic tool to gather and record any past DTC's (Diagnostic Trouble Codes) before starting any service or repair on the throttle body. Keep the ignition in the OFF position when you check for binding at the throttle body shaft, as it could otherwise cause DTC's. A factory set screw on the throttle control changes only the throttle position and should not be used to alter idle speed which the PCM sets. To start, remove the negative battery cable from the battery at its connection. After that, take out the air intake tube from the throttle body flange. Remove the throttle body electrical connection and vacuum hoses that are needed. After that, remove the four bolts holding the throttle body mount, then lift the throttle body from its place on the intake manifold. In addition, examine the o-ring on the old throttle body-to-intake manifold.