How to Service and Repair a Throttle Body on a 4.7L V-8 Engine on Dodge Durango?

Removing the air duct and air resonator box at the throttle body should be the first step in servicing the throttle body on a 4.7L V-8 engine. Take the electrical and vacuum lines off the IAC motor and TPS and then disconnect all cables from the throttle body lever arm. After that, remove all three throttle body bolts and carefully take the throttle body from the intake manifold. During installation, remove dirt from the O-ring and the mating areas on the throttle body and intake manifold. Place the throttle body over the manifold pins and fix it with the three bolts using a torque of 12 Nm (105 in. lbs.). Place the control cables and vacuum line and attach all the electrical connectors. Once done, reattach the air duct and air box to the throttle body.

How to Remove and Install a Throttle Body Without Altering Engine Idle Speed on Dodge Durango?

The factory installed screw in the throttle body should not be changed because all the PCM controls idle speed. Before removing the throttle body, separate the duct at the throttle body and remove the electrical connectors at the MAP sensor, IAC motor and TPS. Also, pull out the vacuum line and every other cable running to the throttle lever, using the instructions for the Accelerator Pedal and Throttle Cable. Following these steps, unbolt all four throttle body mounts and take out the throttle body from the intake manifold, discarding the old gasket between them. First, clean both mating surfaces; then, place a new throttle body-to-intake manifold gasket between them and bolt the throttle body onto the manifold. Attach the seat by tightening the four mounting bolts to 23 Nm (200 in. lbs.) torque. After that, attach the control cables, vacuum line, electrical connections and air duct to the throttle body.

OEM Dodge Durango Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Throttle Bodies found

View related parts
Dodge Durango Throttle Body Part Number: 53032837AB
$316.11 MSRP: $465.00
You Save: $148.89 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body Assembly; Electronic Throttle Body Module
- Replaces: 53032837AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Dodge Durango | Adventurer, Limited, SE, SLT, SXT | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Durango Throttle Body Part Number: 53034251AD
$232.58 MSRP: $343.00
You Save: $110.42 (33%)
ADD TO CART
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body Assembly
- Replaces: 53034251AB, 53034251AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2025 Dodge Durango | Citadel, Crew, GT, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SXT, Special Service | 5.7L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Durango Throttle Body Part Number: 4591847AC
$308.30 MSRP: $471.00
You Save: $162.70 (35%)
ADD TO CART
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body Assembly
- Replaces: 68060354AA, 4591847AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2012, 2009 Dodge Durango | Citadel, Crew, Limited Hybrid, R/T, Special Service | 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Throttle Body Part Number: 4861661AB
$375.56 MSRP: $552.00
You Save: $176.44 (32%)
ADD TO CART
Product Specifications
- Other Name: Throttle; Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body.
- Replaces: 4861661AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Durango | SE, SLT, SXT | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Dodge Durango Throttle Body Part Number: 53032801AC
$425.94 MSRP: $626.00
You Save: $200.06 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body Module.
- Replaces: 53032801AA, 53032801AB, 68060353AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2009 Dodge Durango | Adventurer, Limited, SE, SLT, ST, SXT | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Throttle Body Part Number: 5184349AF
$435.37 MSRP: $662.00
You Save: $226.63 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body Assembly; Electronic Throttle Body Module
- Replaces: 5184349AE, 5184349AC, 5184349AD, 5184349AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2025 Dodge Durango | Citadel, Crew, Express, GT, GT Plus, GT Premium, Heat, Limited, Pursuit, Rallye, SXT, SXT Plus, Special Service | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Durango Throttle Body Part Number: 53013241AC
$378.72
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 53013241AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Dodge Durango | Base, SLT, SLT Plus, Sport | 8 Cyl 4.7 L GAS
View related parts
Dodge Durango Throttle Body Part Number: 5114397AA
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Dodge Durango | Adventurer, Limited, SLT, ST, SXT | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Durango Throttle Body Part Number: 5139073AB
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Dodge Durango | SLT, ST, SXT | 6 Cyl 3.7 L GAS
View related parts
Dodge Durango Throttle Body Part Number: 5161805AA
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body Assembly
- Replaces: 53032120AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Dodge Durango | Limited, SLT, ST | 5.7L V8, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Throttle Body Part Number: 68184386AE
$416.78 MSRP: $612.00
You Save: $195.22 (32%)
Product Specifications
- Other Name: Throttle
- Replaces: 68184386AA, 68184386AD, 68184386AC, 68184386AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2023-2025 Dodge Durango
- 2021 Dodge Durango | 6.2L V8
View related parts
Dodge Durango Throttle Body Part Number: 53032691AA
Product Specifications
- Replaces: 53030807AB, 53031733AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2003 Dodge Durango | Base, R/T, SLT, SLT Plus, SXT, Sport | 5.2L V8, 5.9L V8, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Throttle Body Part Number: 5114401AA
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Dodge Durango | SLT, ST | 6 Cyl 3.7 L GAS
View related parts
Dodge Durango Throttle Body Part Number: 53013163AD
Product Specifications
- Replaces: 53013163AC, 53013163AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Dodge Durango | Base, SLT, SLT Plus, SXT, Sport | 4.7L V8, 8 Cyl 4.7 L GAS

Dodge Durango Throttle Body

Choose OEM Throttle Body that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Throttle Body follows strict manufacturing steps to lock in quality and fit. If your Dodge Durango matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Durango parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Throttle Body is mounted in Dodge Durango vehicles to control the amount of air supplied to the engine which play significantly in the performance and fuel economy of the car. Sitting between the air cleaner and intake manifold, it incorporates a butterfly valve which opens or closes in proportion to accelerator pedal command. Current generation Dodge Durango employ Electronic Throttle Control (ETC) which eliminates mechanical linkages in favor of electronic signals from different sensors improving vehicle's control and interaction with safety features. In prior models of Dodge Durango vehicles, it is possible that TBI has been used and it is a type of fuel injection known as Throttle Body Injection (TBI). There are however newer designs of the fuel injection systems which have more than one fuel injector thus enabling better control of air and fuel mixture. Throttle Bodies are ordinarily safe, however the wear and the dirt can cause hurting performance, at which the Throttle Position Sensor (TPS) or the Idle Air Control (IAC) valve ought to be cleaned or swapped.

Dodge Durango Throttle Body Parts and Q&A

Throttle Body
53013163AD
Q: How to Service and Repair a Throttle Body on a 4.7L V-8 Engine on Dodge Durango?
A:
Removing the Air Duct and air resonator box at the throttle body should be the first step in servicing the throttle body on a 4.7L V-8 engine. Take the electrical and vacuum lines off the IAC motor and TPS and then disconnect all cables from the throttle body lever arm. After that, remove all three throttle body bolts and carefully take the throttle body from the Intake Manifold. During installation, remove dirt from the O-ring and the mating areas on the throttle body and intake manifold. Place the throttle body over the manifold pins and fix it with the three bolts using a torque of 12 Nm (105 in. lbs.). Place the control cables and vacuum line and attach all the electrical connectors. Once done, reattach the air duct and air box to the throttle body.
Throttle Body
53013241AC
Q: How to Remove and Install a Throttle Body Without Altering Engine Idle Speed on Dodge Durango?
A:
The factory installed screw in the throttle body should not be changed because all the PCM controls idle speed. Before removing the throttle body, separate the duct at the throttle body and remove the electrical connectors at the MAP Sensor, IAC motor and TPS. Also, pull out the vacuum line and every other cable running to the throttle lever, using the instructions for the Accelerator Pedal and Throttle Cable. Following these steps, unbolt all four throttle body mounts and take out the throttle body from the Intake Manifold, discarding the old gasket between them. First, clean both mating surfaces; then, place a new throttle body-to-intake manifold gasket between them and bolt the throttle body onto the manifold. Attach the seat by tightening the four mounting bolts to 23 Nm (200 in. lbs.) torque. After that, attach the control cables, vacuum line, electrical connections and Air Duct to the throttle body.