How to Maintain a MAP Sensor for Optimal Performance on 2009 Dodge Grand Caravan?

Always start by cleaning the space near the sensor to stop any dirt or debris from getting into the intake manifold. There is a MAP sensor placed on the intake manifold. The first step should be to isolate the negative battery cable from where it is attached at the battery. Following this step, remove the electrical connector from the sensor. Last, loosen the MAP sensor from the intake manifold by rotating it 1/4 turn in the opposite direction of the car's hands.

OEM 2009 Dodge Grand Caravan MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2009 Dodge Grand Caravan M.A.P. Sensor Part Number: 68199324AB
$61.94 MSRP: $84.25
You Save: $22.31 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 5033310AC, 68199324AA, 5149091AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.4 x 6.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68199324AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Grand Caravan Submodels:
- C/V, SE, SXT | 3.3L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2009 Dodge Grand Caravan MAP Sensor Parts and Q&A

Q: How to Maintain a MAP Sensor for Optimal Performance on 2009 Dodge Grand Caravan?
A: Always start by cleaning the space near the sensor to stop any dirt or debris from getting into the intake manifold. There is a MAP sensor placed on the intake manifold. The first step should be to isolate the negative battery cable from where it is attached at the battery. Following this step, remove the electrical connector from the sensor. Last, loosen the MAP sensor from the intake manifold by rotating it 1/4 turn in the opposite direction of the car's hands.