Other Name: Hinge - Liftgate; Liftgate Hinge, Rear; Door Hinge; Hinge Liftgate; Liftgate Hinge
Position: Rear
Replaces: 5074292AB, 5074292AC, 5074292AA
Item Weight: 1.00 Pounds
Item Dimensions: 4.3 x 3.5 x 1.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5074292AD
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Dodge Journey Submodels:
AVP, Base, Crew, Crossroad, Express, GT, Limited, Lux, Mainstreet, R/T, SE, SE Value, SXT | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
2009 Dodge Journey Liftgate Hinge Parts and Q&A
Q: How to Replace a Liftgate Hinge Without Removing the Liftgate on 2009 Dodge Journey?
A: Changing a trunk or liftgate hinge does not require removing the entire liftgate; each hinge can be changed without removing it. Make sure the liftgate is all the way up and use a lifting device to keep it there until the work is complete. Remove the upper rear headliner trim by using a trim stick C-4755 or an equivalent item. To ease the installation, place a mark on the liftgate where your hinge will be located. After that, remove the upper hinge bolts (1), next remove the lower hinge bolts (1) and finally pull the hinge out of the car. Removing and moving the hinges should only be done when a suitable body sealant is applied.