How to Service and Repair an Engine Mount for 2WD and 4WD for Front on 2009 Dodge Ram 2500?

Before servicing or repairing the engine mount on a 2WD vehicle, take off the negative battery cable and raise the vehicle. Open the mounts with bolts, then use engine support fixture tool 8534B to lift the engine up. Next, free the engine mount to insulator bolts and then take out the insulator. For a 4WD, first take off the negative battery cable and then elevate the vehicle. Take off the skid plate and the front crossmember. After that, get the engine oil filter out and prop up the engine using the engine support fixture special tool 8534B. Bring your jack level with the front axle, unscrew the (4) bolts binding the engine mounts, as well as the (3) bolts that attach the front axle to the left engine bracket and then pull the rear axle down. Drain oil from the sump and lower the front of the vehicle so that the front axle is on the ground. Take out the (6) bolts under the car, raise the front of the engine high and replace both engine mounts (4,8) last.

OEM 2009 Dodge Ram 2500 Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Engine Mounts found

View related parts
2009 Dodge Ram 2500 Motor Mount, Driver Side Part Number: 52121815AC
$261.72 MSRP: $387.00
You Save: $125.28 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Engine Mount, Left; Mount Bracket; Front Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Driver Side
- Replaces: 52121815AB
- Item Weight: 12.20 Pounds
- Item Dimensions: 5.7 x 5.9 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52121815AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
- Laramie, SLT, ST, SXT, TRX | 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6
View related parts
2009 Dodge Ram 2500 Support Bracket Part Number: 52121774AF
$128.78 MSRP: $171.00
You Save: $42.22 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Transmission Support; Manual Trans Brkt; Engine Brkt; Transfer Case Mt; Motor Mt; Transmission Mount Bracket; Rear Mount
- Replaces: 52121774AB, 52121535AC, 52121774AA, 52121774AE, 52121535AB, 52121774AD
- Item Weight: 9.20 Pounds
- Item Dimensions: 14.2 x 5.3 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52121774AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
- Laramie, SLT, ST, Sport, TRX4 | 5.9L L6, 6 Cyl 5.9 L DIESEL, 6.7L L6
View related parts
2009 Dodge Ram 2500 Transmission Mount Bracket Part Number: 52121486AE
$131.33 MSRP: $174.00
You Save: $42.67 (25%)
ADD TO CART
Product Specifications
- Other Name: Insulator - Transmission Support; Auto/Manual Trans Bracket; Engine/Transfer Mt; Motor Mt; Rear Mount
- Replaces: 52121486AC, 52121486AD
- Item Weight: 7.60 Pounds
- Item Dimensions: 6.3 x 8.6 x 14.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52121486AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
- Laramie, SLT, ST, Sport, TRX4 | 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6.7L L6
View related parts
2009 Dodge Ram 2500 Motor Mount, Passenger Side Part Number: 52122710AA
$145.99 MSRP: $219.00
You Save: $73.01 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount Bracket, Right; Engine Mount, Right; Engine Mount Torque Strut; Engine Support; Mount Bracket; Front Mount; Mount Insulator; Mount; Insulator Engine Mount; Engine Mount Bracket
- Position: Passenger Side
- Replaces: 52121506AB, 52121530AB
- Item Weight: 6.30 Pounds
- Item Dimensions: 4.6 x 5.4 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52122710AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Ram 2500 Transmission Mount Part Number: 52122843AG
$222.07 MSRP: $327.00
You Save: $104.93 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Transmission Support; Auto/Manual Brackets; Engine/Transfer Case Mount; Motor Mount; Transmission Mount Bracket; Rear Mount
- Replaces: 52122843AC, 52122843AA, 52122843AE, 52122843AD, 52122843AF, 52122843AB
- Item Weight: 9.90 Pounds
- Item Dimensions: 15.1 x 6.1 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52122843AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Ram 2500 Motor Mount, Passenger Side Part Number: 68290111AA
$101.86 MSRP: $155.00
You Save: $53.14 (35%)
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Right; Engine Mount, Right; Engine Mount Bracket; Mount Bracket; Front Mount
- Position: Passenger Side
- Replaces: 68140535AB, 52121808AB, 52121808AC, 52121814AB, 52121814AE, 52121814AD, 68140535AA, 52121814AC
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68290111AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
- Laramie, SLT, ST, SXT, TRX | 6 Cyl 6.7 L DIESEL, 6.7L L6
View related parts
2009 Dodge Ram 2500 Transmission Mount Part Number: 68187866AC
$138.13 MSRP: $207.00
You Save: $68.87 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Transmission Support; Auto/Manual Brackets; Engine/Transfer Case Mount; Motor Mount; Transmission Mount Bracket; Rear Mount
- Replaces: 52121493AB, 68187866AB, 68187866AA, 52121493AC
- Item Weight: 8.30 Pounds
- Item Dimensions: 13.3 x 10.1 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68187866AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Ram 2500 Support Bracket Part Number: 52121773AG
$93.10 MSRP: $141.00
You Save: $47.90 (34%)
ADD TO CART
Product Specifications
- Other Name: Insulator - Transmission Support; Manual Transmission Mount Bracket; Manual Transmission Mount; Transmission Mount Bracket; Rear Mount
- Replaces: 52121773AA, 52121773AE, 52121773AF, 52121773AB
- Item Weight: 7.50 Pounds
- Item Dimensions: 14.0 x 5.8 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52121773AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
- Laramie, SLT, ST, Sport, TRX4 | 6 Cyl 5.9 L DIESEL
View related parts
2009 Dodge Ram 2500 Front Mount Part Number: 52122714AB
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Mount Insulator; Insulator Engine Mount
- Replaces: 52122714AA
- Item Weight: 2.70 Pounds
- Item Dimensions: 3.5 x 3.9 x 6.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52122714AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
- Laramie, SLT, ST, Sport, TRX4 | 6 Cyl 5.9 L DIESEL
View related parts
2009 Dodge Ram 2500 Engine Support, Driver Side Part Number: 52121507AB
Product Specifications
- Other Name: Bracket - Engine Mount; Left Engine Mount; Torque Strut; Motor Mount; Mount Bracket; Front Mount; Mount Insulator; Insulator Engine Mount; Engine Mount Bracket
- Position: Driver Side
- Item Weight: 7.30 Pounds
- Item Dimensions: 6.0 x 7.0 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52121507AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Ram 2500 Engine Support, Driver Side Part Number: 52121505AC
Product Specifications
- Other Name: Bracket - Engine Mount; Left Engine Mount; Torque Strut; Motor Mount; Front Mount; Mount Insulator; Insulator Engine Mount; Engine Mount Bracket
- Position: Driver Side
- Replaces: 52121505AB
- Item Weight: 9.00 Pounds
- Item Dimensions: 8.2 x 6.0 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52121505AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Ram 2500 Front Mount Part Number: 68417512AB
$206.21 MSRP: $304.00
You Save: $97.79 (33%)
Product Specifications
- Other Name: Gasket Kit - Engine; Valve Grind Gasket Kit; Overhaul Gasket Set
- Replaces: 68196239AC, 68196239AA, 68196239AB, 68417512AA, 68046260AA
- Item Weight: 3.00 Pounds
- Item Dimensions: 21.0 x 12.7 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68417512AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Ram 2500 Motor Mount, Driver Side Part Number: 52121809AE
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Engine Mount, Right; Engine Mount, Left; Mount Bracket; Front Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Driver Side
- Replaces: 52121809AB, 52121809AD, 52121809AC
- Item Weight: 12.30 Pounds
- Item Dimensions: 10.3 x 6.3 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52121809AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
- Laramie, SLT, ST, SXT, TRX | 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6

2009 Dodge Ram 2500 Engine Mount Parts and Q&A

Q: How to Service and Repair an Engine Mount for 2WD and 4WD for Front on 2009 Dodge Ram 2500?
A: Before servicing or repairing the engine mount on a 2WD vehicle, take off the negative battery cable and raise the vehicle. Open the mounts with bolts, then use engine support fixture tool 8534B to lift the engine up. Next, free the engine mount to insulator bolts and then take out the insulator. For a 4WD, first take off the negative battery cable and then elevate the vehicle. Take off the skid plate and the front crossmember. After that, get the engine oil filter out and prop up the engine using the engine support fixture special tool 8534B. Bring your jack level with the front axle, unscrew the (4) bolts binding the engine mounts, as well as the (3) bolts that attach the front axle to the left engine bracket and then pull the rear axle down. Drain oil from the sump and lower the front of the vehicle so that the front axle is on the ground. Take out the (6) bolts under the car, raise the front of the engine high and replace both engine mounts (4,8) last.