OEM 2009 Dodge Ram 2500 Intake Manifold

2009 Dodge Ram 2500 Intake Manifold Parts and Q&A

• Q: How to Install an Intake Manifold on 2009 Dodge Ram 2500?

  A: Earlier on, you should install the intake manifold seals, before fitting the intake manifold. Then, secure the intake manifold to the engine and fit the IAFM and screw in the manifold bolts, tightening them in a crisscross pattern starting from the center towards the outside so their torque is 12 Nm (105 in. lbs.). Join the leads of the Manifold Absolute Pressure (MAP) Sensor, Intake Air Temperature (IAT) Sensor, Throttle Position (TPS) Sensor, Coolant Temperature (CTS) Sensor and Idle Air Control (IAC) Motor. After preparing the car, you should install the appliances: the generator and the A/C compressor. Link the Brake booster hose and Positive crankcase ventilation (PCV) hose and then fit the resonator and air inlet hose. In the end, position the negative cable on the battery's negative terminal.