How to Remove an Intake Manifold on Dodge Ram 2500?

The intake manifold should be removed only after disconnecting the negative battery cable. After that, get rid of the resonator assembly and the air inlet hose. Release the power connections from the MAP, IAT, TPS and CTS sensors. Following that, cut the brake booster hose and the positive crankcase ventilation (PCV) hose from the engine. Get the generator out and put it to one side, then move on to the air conditioning compressor which should also be set aside without being removed or having freon removed. Comply with the explanation in Cylinder Head Assembly/Fuel Pressure Release/Service and Repair for bleeding the fuel system. Stoping from the outer bolts and going towards the center, loosen all the fasteners that hold in the intake manifold. The assembly can be removed following the removal of the intake manifold and IAFM.

How to Install an Intake Manifold on Dodge Ram 2500?

Before installing the intake manifold, make sure to place the seals first. After that, install the intake manifold with the IAFM, followed by tightening the intake manifold retaining bolts in a row, bracing from the top bolt and working your way down or over to the outside bolts, with 12 Nm (105 in. lbs.) of torque on all of them. Assemble the electrical connectors for the MAP Sensor, IAT Sensor, TPS, CTS and IAC Motor. After that, fit the generator and the A/C compressor to the engine. Following this, pair your Brake booster hose and Positive crankcase ventilation (PCV) hose, after which you can install the resonator assembly and air inlet hose. At the end, attach the negative clamp back to the battery.

OEM Dodge Ram 2500 Intake Manifold

Engine Intake Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Intake Manifolds found

View related parts
Dodge Ram 2500 Intake Manifold Part Number: 68194114AC
$919.44 MSRP: $1340.00
You Save: $420.56 (32%)
Product Specifications
- Other Name: Manifold - Engine Intake; Engine Intake Manifold; Manifold Kit Engine Intake
- Replaces: 68048074AD, 68194114AB, 68194114AA, 68048074AB, 68048074AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Intake Manifold Part Number: 5175896AB
$716.77 MSRP: $1050.00
You Save: $333.23 (32%)
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Package Intake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Intake Manifold Part Number: 5127193AF
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold; Intake Manifold Hardware Kit
- Replaces: 5127193AC, 5127193AD, 5127193AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Dodge Ram 2500 | Laramie, SLT, ST | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Intake Manifold Part Number: 5101945AB
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold; Intake Manifold Hardware Kit
- Replaces: 5101945AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Dodge Ram 2500 | Laramie, SLT, ST | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Intake Manifold Part Number: 53031583
Product Specifications
- Other Name: Manifold - Intake; Manifold Intake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2003 Dodge Ram 2500 | Base, Laramie, SLT, ST | 10 Cyl 8.0 L GAS
View related parts
Dodge Ram 2500 Intake Manifold, Upper Part Number: 53031580
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold, Lower, Upper; Manifold Intake
- Position: Upper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2003 Dodge Ram 2500 | Base, Laramie, SLT, ST | 10 Cyl 8.0 L GAS
View related parts
Dodge Ram 2500 Intake Manifold Part Number: 4897490AC
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Intake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2002 Dodge Ram 2500 | Base | 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Intake Manifold Part Number: 4897490AB
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Intake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999 Dodge Ram 2500 | Base | 8 Cyl 5.9 L GAS

Dodge Ram 2500 Intake Manifold

Choose OEM Intake Manifold that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Intake Manifold follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Intake Manifold of Dodge Ram 2500 vehicles is employed for feeding air or air/fuel mixture to each cylinder in an effective manner affecting the engine power, performance and efficiency. It works through drawing air from the throttle body or carburetor, depending with the kind of the engine it will have. For instance, carbureted and throttle body injected engines introduce fuel directly into manifold while multiport fuel injected engines have individual injectors and newest models with gasoline direct injection bring only air. Heretofore, intake manifolds used in the Dodge Ram 2500 models were made up of cast iron or aluminum though the recent designs major on lightweight composites plastics to boost on the form's fuel efficiency together with cooling. Some manifolds are of variable length to allow the premier air flow and the premier performance at different engine loads. Moving up to intake manifolds can also increase horsepower and torque, particularly for tuned engines because of the improved air flow passage and lighter in weight than the stock ones.

Dodge Ram 2500 Intake Manifold Parts and Q&A

Intake Manifold
68194114AC
Q: How to Remove an Intake Manifold on Dodge Ram 2500?
A:
The intake manifold should be removed only after disconnecting the negative battery cable. After that, get rid of the resonator assembly and the air inlet hose. Release the power connections from the MAP, IAT, TPS and CTS sensors. Following that, cut the brake booster hose and the positive crankcase ventilation (PCV) hose from the engine. Get the generator out and put it to one side, then move on to the air conditioning compressor which should also be set aside without being removed or having freon removed. Comply with the explanation in Cylinder Head Assembly/Fuel Pressure Release/Service and Repair for bleeding the fuel system. Stoping from the outer bolts and going towards the center, loosen all the fasteners that hold in the intake manifold. The assembly can be removed following the removal of the intake manifold and IAFM.
Intake Manifold
5175896AB
Q: How to Install an Intake Manifold on Dodge Ram 2500?
A:
Before installing the intake manifold, make sure to place the seals first. After that, install the intake manifold with the IAFM, followed by tightening the intake manifold retaining bolts in a row, bracing from the top bolt and working your way down or over to the outside bolts, with 12 Nm (105 in. lbs.) of torque on all of them. Assemble the electrical connectors for the MAP Sensor, IAT Sensor, TPS, CTS and IAC Motor. After that, fit the generator and the A/C Compressor to the engine. Following this, pair your Brake booster hose and Positive crankcase ventilation (PCV) hose, after which you can install the resonator assembly and air inlet hose. At the end, attach the negative clamp back to the battery.