How is the Blower Motor Installed in the HVAC Housing on 2009 Jeep Compass?

Set the blower motor into the bottom most part of the HVAC housing. Connect each of the three screws to the motor and the wire lead bracket, if the unit has one and tighten them to 1.2 Nm (10 in. lbs.) while securing them to the HVAC housing. Plug the blower motor into the instrument panel harness connector and snap the lock shut. If your car has one, installing the silencer below the passenger side of the instrument panel is correct. Lastly, attach the negative battery cable once more.

OEM 2009 Jeep Compass Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor found

View related parts
2009 Jeep Compass MOTOR-BLOWER WITH WHEEL Part Number: 5191345AB
$133.69 MSRP: $197.00
You Save: $63.31 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- SKU: 5191345AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2009 Jeep Compass Submodels:
- 75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2009 Jeep Compass Blower Motor Parts and Q&A

Q: How is the Blower Motor Installed in the HVAC Housing on 2009 Jeep Compass?
A: Set the blower motor into the bottom most part of the HVAC housing. Connect each of the three screws to the motor and the wire lead bracket, if the unit has one and tighten them to 1.2 Nm (10 in. lbs.) while securing them to the HVAC housing. Plug the blower motor into the instrument panel harness connector and snap the lock shut. If your car has one, installing the silencer below the passenger side of the instrument panel is correct. Lastly, attach the negative battery cable once more.