How to Service and Repair a Throttle Body on 2009 Jeep Patriot?

To work on the throttle body, first make sure the negative battery cable is disconnected, so you do not get hurt by the movement of the throttle plate. Take out the hose connecting to the throttle body air intake and unplug the throttle body's electrical connector from the throttle body. After that, take out the bolt on the throttle body support bracket and the four bolts that secure the throttle body and bracket to the intake manifold. Check the intake manifold gasket and the throttle body gasket for problems and if the j-nuts seem damaged or worn, change them.

OEM 2009 Jeep Patriot Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Throttle Body found

View related parts
2009 Jeep Patriot Throttle Body Part Number: 4891735AD
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body.; Throttle Body Includes Throttle Position Sensor
- Replaces: 4891735AC
- Item Weight: 2.80 Pounds
- Item Dimensions: 5.9 x 7.0 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4891735AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Patriot Submodels:
- 75th Anniversary, Latitude, Latitude X, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2009 Jeep Patriot Throttle Body Parts and Q&A

Q: How to Service and Repair a Throttle Body on 2009 Jeep Patriot?
A: To work on the throttle body, first make sure the negative battery cable is disconnected, so you do not get hurt by the movement of the throttle plate. Take out the hose connecting to the throttle body air intake and unplug the throttle body's electrical connector from the throttle body. After that, take out the bolt on the throttle body support bracket and the four bolts that secure the throttle body and bracket to the intake manifold. Check the intake manifold gasket and the throttle body gasket for problems and if the j-nuts seem damaged or worn, change them.